[ Usenet FAQs | Web FAQs | Documents | RFC Index ]
Part1 - Part2 - Part3 - Part4 - Part5 - Single Page
Top Document: comp.unix.aix Frequently Asked Questions (Part 1 of 5)
Previous Document: 1.121: How can I tell what virtual printer a print queue is using?
Next Document: 1.123: How do I set the tty name associated with a physical port?
-
Search the FAQ Archives
Part1 - Part2 - Part3 - Part4 - Part5 - Single Page
Top Document: comp.unix.aix Frequently Asked Questions (Part 1 of 5)
Previous Document: 1.121: How can I tell what virtual printer a print queue is using?
Next Document: 1.123: How do I set the tty name associated with a physical port?
1.122: Two srcmstr's are less useful than one?
This can happen on systems that have no console, or systems with an
async terminal as the console but not attached or turned off. One of the
symptoms is a second srcmstr got run. But the second srcmstr is worthless
as we can't use the stop/startsrc commands, refresh inetd, qdaemon won't
start, etc.
To resolve this, type:
smit chgtty
and add the keyword 'clocal' in following lines:
STTY attributes for RUN TIME
STTY attributes for LOGIN
Top Document: comp.unix.aix Frequently Asked Questions (Part 1 of 5)
Previous Document: 1.121: How can I tell what virtual printer a print queue is using?
Next Document: 1.123: How do I set the tty name associated with a physical port?
Part1 - Part2 - Part3 - Part4 - Part5 - Single Page
[ Usenet FAQs | Web FAQs | Documents | RFC Index ]
Send corrections/additions to the FAQ Maintainer:
bofh@mail.teleweb.pt (Jose Pina Coelho)
Last Update October 22 2009 @ 05:22 AM