3A. Installing Grips

-hairspray
-Use some sort of motor cycle grip glue on the grip.  This will make the 
 grip impossible to remove.
-Wrap the bar with double sided tape and slide an alcohol-coated grip on it.
-Plain old water.
-Spit
-Windex
-Soap
-WD-40
-Wire/Zip-tie
-Compressed air

Top Document: Mountain Biking FAQ
Previous Document: 3. Tech
Next Document: 3B. Clipless Pedals

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
vccheng@gpu.srv.ualberta.ca

Last Update October 22 2009 @ 05:22 AM