faqs.org - Internet FAQ Archives

RFC 4401 - A Pseudo-Random Function (PRF) API Extension for the


Or Display the document by number




Network Working Group                                        N. Williams
Request for Comments: 4401                              Sun Microsystems
Category: Standards Track                                  February 2006

         A Pseudo-Random Function (PRF) API Extension for the
    Generic Security Service Application Program Interface (GSS-API)

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2006).

Abstract

   This document defines a Pseudo-Random Function (PRF) extension to the
   Generic Security Service Application Program Interface (GSS-API) for
   keying application protocols given an established GSS-API security
   context.  The primary intended use of this function is to key secure
   session layers that do not or cannot use GSS-API per-message message
   integrity check (MIC) and wrap tokens for session protection.

Table of Contents

   1. Introduction ....................................................2
      1.1. Conventions Used in This Document ..........................2
   2. GSS_Pseudo_random() .............................................2
      2.1. C-Bindings .................................................5
   3. IANA Considerations .............................................5
   4. Security Considerations .........................................5
   5. References ......................................................7
      5.1. Normative References .......................................7
      5.2. Informative References .....................................7

1.  Introduction

   A need has arisen for users of the GSS-API to key applications'
   cryptographic protocols using established GSS-API security contexts.
   Such applications can use the GSS-API [RFC2743] for authentication,
   but not for transport security (for whatever reasons), and since the
   GSS-API does not provide a method for obtaining keying material from
   established security contexts, such applications cannot make
   effective use of the GSS-API.

   To address this need, we define a pseudo-random function (PRF)
   extension to the GSS-API.

   Though this document specifies an abstract API as an extension to the
   GSS-API version 2, update 1, and though it specifies the bindings of
   this extension for the C programming language, it does not specify a
   revision of the GSS-API and so does not address the matter of how
   portable applications detect support for and ensure access to this
   extension.  We defer this matter to an expected, comprehensive update
   to the GSS-API.

1.1.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

2.  GSS_Pseudo_random()

   Inputs:

   o  context CONTEXT handle,

   o  prf_key INTEGER,

   o  prf_in OCTET STRING,

   o  desired_output_len INTEGER

   Outputs:

   o  major_status INTEGER,

   o  minor_status INTEGER,

   o  prf_out OCTET STRING

   Return major_status codes:

   o  GSS_S_COMPLETE indicates no error.

   o  GSS_S_NO_CONTEXT indicates that a null context has been provided
      as input.

   o  GSS_S_CONTEXT_EXPIRED indicates that an expired context has been
      provided as input.

   o  GSS_S_UNAVAILABLE indicates that the mechanism lacks support for
      this function or, if the security context is not fully
      established, that the context is not ready to compute the PRF with
      the given prf_key, or that the given prf_key is not available.

   o  GSS_S_FAILURE indicates general failure, possibly due to the given
      input data being too large or of zero length, or due to the
      desired_output_len being zero; the minor status code may provide
      additional information.

   This function applies the established context's mechanism's keyed
   pseudo-random function (PRF) to the input data ('prf_in'), keyed with
   key material associated with the given security context and
   identified by 'prf_key', and outputs the resulting octet string
   ('prf_out') of desired_output_len length.

   The minimum input data length is one octet.

   Mechanisms MUST be able to consume all the provided prf_in input data
   that is 2^14 or fewer octets.

   If a mechanism cannot consume as much input data as provided by the
   caller, then GSS_Pseudo_random() MUST return GSS_S_FAILURE.

   The minimum desired_output_len is one.

   Mechanisms MUST be able to output at least up to 2^14 octets.

   If the implementation cannot produce the desired output due to lack
   of resources, then it MUST return GSS_S_FAILURE and MUST set a
   suitable minor status code.

   The prf_key can take on the following values: GSS_C_PRF_KEY_FULL,
   GSS_C_PRF_KEY_PARTIAL, or mechanism-specific values, if any.  This
   parameter is intended to distinguish between the best cryptographic
   keys that may be available only after full security context
   establishment and keys that may be available prior to full security
   context establishment.  For some mechanisms, or contexts, those two

   prf_key values MAY refer to the same cryptographic keys; for
   mechanisms like the Kerberos V GSS-API mechanism [RFC1964] where one
   peer may assert a key that may be considered better than the others
   they MAY be different keys.

   GSS_C_PRF_KEY_PARTIAL corresponds to a key that would have been used
   while the security context was partially established, even if it is
   fully established when GSS_Pseudo_random() is actually called.
   Mechanism-specific prf_key values are intended to refer to any other
   keys that may be available.

   The GSS_C_PRF_KEY_FULL value corresponds to the best key available
   for fully-established security contexts.

   GSS_Pseudo_random() has the following properties:

   o  its output string MUST be a pseudo-random function [GGM1] [GGM2]
      of the input keyed with key material from the given security
      context -- the chances of getting the same output given different
      input parameters should be exponentially small.

   o  when successfully applied to the same inputs by an initiator and
      acceptor using the same security context, it MUST produce the
      _same results_ for both, the initiator and acceptor, even if
      called multiple times (as long as the security context is not
      expired).

   o  upon full establishment of a security context, all cryptographic
      keys and/or negotiations used for computing the PRF with any
      prf_key MUST be authenticated (mutually, if mutual authentication
      is in effect for the given security context).

   o  the outputs of the mechanism's GSS_Pseudo_random() (for different
      inputs) and its per-message tokens for the given security context
      MUST be "cryptographically separate"; in other words, it must not
      be feasible to recover key material for one mechanism operation or
      transform its tokens and PRF outputs from one to the other given
      only said tokens and PRF outputs.  (This is a fancy way of saying
      that key derivation and strong cryptographic operations and
      constructions must be used.)

   o  as implied by the above requirement, it MUST NOT be possible to
      access any raw keys of a security context through
      GSS_Pseudo_random(), no matter what inputs are given.

2.1.  C-Bindings

   #define GSS_C_PRF_KEY_FULL 0
   #define GSS_C_PRF_KEY_PARTIAL 1

   OM_uint32 gss_pseudo_random(
     OM_uint32                     *minor_status,
     gss_ctx_id_t                  context,
     int                           prf_key,
     const gss_buffer_t            prf_in,
     ssize_t                       desired_output_len,
     gss_buffer_t                  prf_out
   );

   Additional major status codes for the C-bindings:

   o  GSS_S_CALL_INACCESSIBLE_READ

   o  GSS_S_CALL_INACCESSIBLE_WRITE

   See [RFC2744].

3.  IANA Considerations

   This document has no IANA considerations currently.  If and when a
   relevant IANA registry of GSS-API symbols is created, then the
   generic and language-specific function names, constant names, and
   constant values described above should be added to such a registry.

4.  Security Considerations

   Care should be taken in properly designing a mechanism's PRF
   function.

   GSS mechanisms' PRF functions should use a key derived from contexts'
   authenticated session keys and should preserve the forward security
   properties of the mechanisms' key exchanges.

   Some mechanisms may support the GSS PRF function with security
   contexts that are not fully established, but applications MUST assume
   that authentication, mutual or otherwise, has not completed until the
   security context is fully established.

   Callers of GSS_Pseudo_random() should avoid accidentally calling it
   with the same inputs.  One useful technique is to prepend to the
   prf_in input string, by convention, a string indicating the intended
   purpose of the PRF output in such a way that unique contexts in which
   the function is called yield unique inputs to it.

   Pseudo-random functions are, by their nature, capable of producing
   only limited amounts of cryptographically secure output.  The exact
   amount of output that one can safely use, unfortunately, varies from
   one PRF to another (which prevents us from recommending specific
   numbers).  Because of this, we recommend that unless you really know
   what you are doing (i.e., you are a cryptographer and are qualified
   to pass judgement on cryptographic functions in areas of period,
   presence of short cycles, etc.), you limit the amount of the PRF
   output used to the necessary minimum.  See [RFC4086] for more
   information about "Randomness Requirements for Security".

   For some mechanisms, the computational cost of computing
   GSS_Pseudo_random() may increase significantly as the length of the
   prf_in data and/or the desired_output_length increase.  This means
   that if an application can be tricked into providing very large input
   octet strings and requesting very long output octet strings, then
   that may constitute a denial of service attack on the application;
   therefore, applications SHOULD place appropriate limits on the size
   of any input octet strings received from their peers without
   integrity protection.

5.  References

5.1.  Normative References

   [GGM1]     Goldreich, O., Goldwasser, S., and S. Micali, "How to
              Construct Random Functions", Journal of the ACM, October
              1986.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2743]  Linn, J., "Generic Security Service Application Program
              Interface Version 2, Update 1", RFC 2743, January 2000.

   [RFC2744]  Wray, J., "Generic Security Service API Version 2 :
              C-bindings", RFC 2744, January 2000.

5.2.  Informative References

   [GGM2]     Goldreich, O., Goldwasser, S., and S. Micali, "On the
              Cryptographic Applications of Random Functions",
              Proceedings of CRYPTO 84 on Advances in cryptology, 1985.

   [RFC4086]  Eastlake, D., 3rd, Schiller, J., and S. Crocker,
              "Randomness Requirements for Security", BCP 106, RFC 4086,
              June 2005.

   [RFC1964]  Linn, J., "The Kerberos Version 5 GSS-API Mechanism", RFC
              1964, June 1996.

Author's Address

   Nicolas Williams
   Sun Microsystems
   5300 Riata Trace Ct
   Austin, TX  78727
   US

   EMail: Nicolas.Williams@sun.com

Full Copyright Statement

   Copyright (C) The Internet Society (2006).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is provided by the IETF
   Administrative Support Activity (IASA).

 

User Contributions:

Comment about this RFC, ask questions, or add new information about this topic: