faqs.org - Internet FAQ Archives

RFC 610 - Further datalanguage design concepts


Or Display the document by number




Network Working Group        Richard Winter, Jeffrey Hill, Warren Greiff
RFC # 610                                                            CCA
NIC # 21352                                            December 15, 1973

                  Further Datalanguage Design Concepts

                             Richard Winter
                              Jeffrey Hill
                             Warren Greiff

                    Computer Corporation of America
                           December 15, 1973

                             Acknowledgment

During the course of the Datacomputer Project, many people have
contributed to the development of datalanguage.

The suggestions and criticisms of Dr. Gordon Everest (University of
Minnesota), Dr. Robert Taylor (University of Massachusetts), Professor
Thomas Cheatham (Harvard University) and Professor George Mealy (Harvard
University) have been particularly useful.

Within CCA, several people in addition to the authors have participated
in the language design at various stages of the project. Hal Murray,
Bill Bush, David Shipman and Dale Stern have been especially helpful.

1.  Introduction

1.1 The Datacomputer System

The datacomputer is a large-scale data utility system, offering data
storage and data management services to other computers.

The datacomputer differs from traditional data management systems in
several ways.

First, it is implemented on dedicated hardware, and comprises a separate
computing system specialized for data management.

Second, the system is implemented on a large scale. Data is intended to
be stored on mass storage devices, with capacities in the range of a
trillion bits.  Files on the order of one hundred billion bits are to be
kept online.

Third, it is intended to support sharing of data among processes
operating in diverse environments.  That is, the programs which share a
given data base may be written in different languages, execute on
different hardware under different operating systems, and support end
users with radically different requirements.  To enable such shared use
of a data base, transformations between various hardware representations
and data structuring concepts must be achieved.

Finally, the datacomputer is designed to function smoothly as a
component of a much larger system: a computer network.  In a computer
network, the datacomputer is a node specialized for data management, and
acting as a data utility for the other nodes.  The Arpanet, for which
the datacomputer is being developed, is an international network which
has over 60 nodes.  Of these, some are presently specialized for
terminal handling, others are specialized for computation (e.g., the
ILLIAC IV), some are general purpose service nodes (e.g., MULTICS) and
one (CCA) is specialized for data management.

1.2 Datalanguage

Datalanguage is the language in which all requests to the datacomputer
are stated.  It includes facilities for data description and creation,
for retrieval of or changes to stored data, and for access to a variety
of auxiliary facilities and services.  In datalanguage it is possible to
specify any operation the datacomputer is capable of performing.
Datalanguage is the only language accepted by the datacomputer and is
the exclusive means of access to data and services.

1.3 Present Design Effort

We are now engaged in developing complete specifications for
datalanguage; this is the second iteration in the language design
process.

A smaller, initial design effort developed some concepts and principles
which are described in the third working paper in this series.  These
have been used as the basis of software implementations resulting in an
initial network service capability.  A user manual for this system was
published as working paper number 7.

As a result of experience gained in implementation and service, through
further study of user requirements and work with potential users, and
through investigation of other work in the data management field, quite
a few ideas have been developed for the improvement of datalanguage.
These are being assimilated into the language design in the iteration
now in progress.

When the language design is complete, it will be incorporated into the
existing software (requiring changes to the language compiler, but
having little impact on the rest of the system).

Datacomputer users will first have access to the new language during
1975.

1.4 Purpose of this Paper

This paper presents concepts and preliminary results, rather than a
completed design.  There are two reasons for publishing now.

The first is to provide information to those planning to use the
datacomputer.  They may benefit from knowledge of our intentions for
development.

The second is to enable system and language designers to comment on our
work before the design is frozen.

1.5 Organization of the Paper

The remainder of the paper is divided into four sections.

Section 2 discusses the most global considerations for language design.
This comprises our view of the problem; it has influenced our work to
date and will determine most of our actions in completion of the design.
This section provides background for section 3, and reviews some

material that will be familiar to those who have been following our work
closely.

Section 3 discusses some of the specific issues we have worked on.  The
emphasis is on solutions and options for solution.

In sections 2 and 3 we are presenting our "top-down" work: this is the
thinking we have done based on known requirements and our conception of
the desirable properties of datalanguage.

We have also been working from the opposite end, developing the
primitives from which to construct the language.  Section 4 presents our
work in this area: a model datacomputer which will ultimately provide a
precise semantic definition of datalanguage.  Section 4 explains that
part of the model which is complete, and relates this to our other work.

Section 5 discusses work that remains, both on the model and in our
top-down analysis.

2.  Considerations for Language Design

2.1 Introduction

Data management is the task of managing data as a resource, independent
of hardware and applications programs.  It can be divided it into five
major sub-tasks:

    (1) _creating_ databases in storage,
    (2) making the data _available_ (e.g., satisfying queries),
    (3) _maintaining_ the data as information is added, deleted and
        modified,
    (4) assuring the _integrity_ of the data (e.g., through backup and
        recovery systems, through internal consistency checks),
    (5) _regulating_access_, to protect the databases, the system, and
        the privacy of users.

These are the major data-related functions of the datacomputer; while
the system will ultimately provide other services (such as accounting
for use, monitoring performance) these are really auxiliary and common
to all service facilities.

This section presents global considerations for the design of
datalanguage, based on our observations about the problem and the
environment in which it is to be solved.  The central problem is data
management, and the datacomputer shares the same goals as many currently
available data management systems.  Several aspects of the datacomputer
create a unique set of problems to be solved.

2.2 Hardware Considerations

2.2.1 Separate Box

The datacomputer is a complete data management utility in a separate,
closed box.  That is, the hardware, the data and the data management
software are segregated from any general-purpose processing facilities.
There is a separate installation dedicated to data management.
Datalanguage is the only means users have for communicating with the
datacomputer and the sole activity of the datacomputer is to process
datalanguage requests.

Dedicating hardware provides an obvious advantage: one can specialize it
for data management.  The processor(s) can be modified to have data
management "instructions"; common low-level software functions can be
built into the hardware.

A less obvious, but possibly more significant, advantage is gained from
the separateness itself.  The system can be more easily protected.  A
fully-developed datacomputer on which there is only maintenance activity
can provide a very carefully controlled environment.  First, it can be
made as physically secure as required.  Second, it needs to execute only
system software developed at CCA; all user programs are in a high-level
language (datalanguage) which is effectively interpreted by the system.
Hence, only datacomputer system software processes the data, and the
system is not very vulnerable to capture by a hostile program.  Thus,
since there is the potential to develop data privacy and integrity
services that are not available on general-purpose systems, one can
expect less difficulty in developing privacy controls (including
physical ones) for the datacomputer than for the systems it serves.

2.2.2 Mass Storage Hardware

The datacomputer will store most of its data on mass storage devices,
which have distinctive access characteristics.  Two examples of such
hardware are Precision Instruments' Unicon 690 and Ampex Corporation's
TBM system.  They are quite different from disks, and differ
significantly from one another.

However, almost all users will be ignorant of the characteristics of
these devices; many will not even know that the data they use is at the
datacomputer.  Finally, as the development of the system progresses,
data may be invisibly shunted from one datacomputer to another, and as a
result be stored in a physical format quite different from that
originally used.

In such an environment, it is clear that requests for data should be
stated in logical, not physical terms.

2.3 Network Environment

The network environment provides additional requirements for
datacomputer design.

2.3.1 Remote Use

Since the datacomputer is to be accessed remotely, the requirement for
effective data selection techniques and good mechanisms for the
expression of selection criteria is amplified.  This is because of the
narrow path through which network users communicate with the
datacomputer.  Presently, a typical process-to-process transfer rate
over the Arpanet is 30 kilobits per second.  While this can be increased
through optimization of software and protocols, and through additional

expenditure for hardware and communications lines, it seems safe to
assume that it will not soon approach local transfer rates (measured in
the megabits per second).

A typical request calls for either transfer of part of a file to a
remote site, or for selective update to a file already stored at the
datacomputer.  In both of these situations, good mechanisms for
specifying the parts of the data to be transmitted or changed will
reduce the amount of data ordinarily transferred.  This is extremely
important because with the low per bit cost of storing data at the
datacomputer, transmission costs will be a significant part of the total
cost of datacomputer usage.

2.3.2 Interprocess Use of the Datacomputer System

Effective use of the network requires that groups of processes, remote
from one another, be capable of cooperating to accomplish a given task
or provide a given service.  For example, to solve a given problem which
involves array manipulation, data retrieval, interaction with a user at
a terminal, and the generalized services of a language like PL/I, it may
be most economical to have four cooperating processes.  One of these
could execute at the ILLIAC IV, one at the datacomputer, one at MULTICS,
and one at a TIP.  While there is overhead in setting up these four
processes and in having them communicate, each is doing its job on a
system specialized for that job.  In many cases, the result of using the
specialized system is a gain of several orders of magnitude in economy
or efficiency (for example, online storage at the datacomputer has a
capital cost two orders of magnitude lower than online costs on
conventional systems).  As a result, there is considerable incentive to
consider solutions involving cooperating processes on specialized
systems.

To summarize: the datacomputer must be prepared to function as a
component of small networks of specialized processes, in order that it
can be used effectively in a network in which there are many specialized
nodes.

2.3.3 Common Network Data Handling

A large network can support enough data management hardware to construct
more than one datacomputer.  While this hardware can be combined into
one even larger datacomputer, there are advantages to configuring it as
two (or possibly more) systems.  Each system should be large enough to
obtain economies of scale in data storage and to support the data
management software.  Important data bases can be duplicated, with a
copy at each datacomputer; if one datacomputer fails, or is cut off by

network failure, the data is still available. Even if duplicating the
file is not warranted, the description can be kept at the different
datacomputers so that applications which need to store data constantly
can be guaranteed that at least one datacomputer is available to receive
input.

These kinds of failure protection involve cooperation between a pair of
datacomputers; in some sense, they require that the two datacomputers
function as a single system.  Given a system of datacomputers (which one
can think of as a small network of datacomputers), it is obviously
possible to experiment with providing additional services on the
datacomputer-network level.  For example, all requests could be
addressed simply to the datacomputer-network; the datacomputer-network
could then determine where each referenced file was stored (i.e., which
datacomputer), and how best to satisfy the request.

Here, two kinds of cooperation in the network environment have been
mentioned: cooperation among processes to solve a given problem, and
cooperation among datacomputers to provide global optimizations in the
network-level data handling problem.  These are only two examples,
especially interesting because they can be implemented in the near term.
In the network, much more general kinds of cooperation are possible, if
a little farther in the future.  For example, eventually, one might want
the datacomputer(s) to be part of a network-wide data management system,
in which data, directories, services, and hardware were generally
distributed about the network.  The entire system could function as a
whole under the right circumstances.  Most requests would use the data
and services of only a few nodes.  Within this network-wide system,
there would be more than one data management system, but all systems
would be interfaced through a common language.  Because the
datacomputers represent the largest data management resource in the
network, they would certainly play an important role in any network-wide
system.  The language of the datacomputer (datalanguage) is certainly a
convenient choice for the common language of such a system.

Thus a final, albeit futuristic, requirement imposed by the network on
the design of the datacomputer system, is that it be a suitable major
component for network-wide data management systems. If feasible, one
would like datalanguage to be a suitable candidate for the common
language of a network-wide group of cooperating data management systems.

2.4 Different Modes of Datacomputer Usage

Within this network environment, the datacomputer will play several
roles.  In this section four such roles are described. Each of them
imposes constraints on the design of datalanguage.  We can analyze them
in terms of four overlapping advantages which the datacomputer provides:

    1.  Generalized data management services
    2.  Large file handling
    3.  Shared access
    4.  Economic volume storage

Of course, the primary reason for using the datacomputer will be the
data management services which it provides.  However, for some
applications size will be the dominating factor in that the datacomputer
will provide for online access to files which are so large that
previously only offline storage and processing were possible.  The
ability to share data between different network sites with widely
different hardware is another feature provided only by the datacomputer.
Economies of scale make the datacomputer a viable substitute for tapes
in such applications as operating system backup.

Naturally, a combination of the above factors will be at work in most
datacomputer applications.  The following subsections describe some
possible modes of interaction with the datacomputer.

2.4.1 Support of Large Shared Databases

This is the most significant application of the datacomputer, in nearly
every sense.

Projects are already underway which will put databases of over one
hundred billion bits online on the Arpanet datacomputer.  Among these
are a database which will ultimately include 10 years of weather
observations from 5000 weather stations located all over the world.  As
online databases, these are unprecedented in size. They will be of
international interest and be shared by users operating on a wide
variety of hardware and in a wide variety of languages.

Because these databases are online in an international network, and
because they are expected to be of considerable interest to researchers
in the related fields, it seems obvious that there will be extremely
broad patterns of use.  A strong requirement, then, is a flexible and
general approach to handling them.  This requirement of providing
different users of a database with different views of the data is an
overriding concern of the datalanguage design effort.  It is discussed
separately in Section 2.5.

2.4.2 Extensions of Local Data management Systems

We imagine local data handling systems (data management systems,
applications-oriented packages, text-handling systems, etc.) wanting to
take advantage of the datacomputer.  They may do so because of the

economics of storage, because of the data management services, or
because they want to take advantage of data already stored at the
datacomputer.  In any case, such systems have some distinctive
properties as datacomputer users: (1) most would use local data as well
as datacomputer data, (2) many would be concerned with the translation
of local requests into datalanguage.

For example, a system which does simple data retrieval and statistical
analysis for non-programming social scientists might want to use a
census database stored at the datacomputer.  Such a system may perform a
range of data retrieval functions, and may need sophisticated
interaction with the datacomputer.  Its usage patterns would make quite
a contrast with those of a single application program whose sole use of
the datacomputer involves printing a specific report based on a single
known file.

This social-science system would also use some local databases, which it
keeps at its own site because they are small and more efficiently
accessed locally.  One would like it to be convenient to think of data
the same way, whether it is stored locally or at the datacomputer.
Certainly at the lower levels of the local software, there will have to
be differences in interfacing; it would be nice, however, if local
concepts and operations could easily be translated into datalanguage.

2.4.3 File Level Use of the Datacomputer

In this mode of use, other computer systems take advantage of the online
storage capacity of the datacomputer.  To these systems, datacomputer
storage represents a new class of storage: cheaper and safer than tape,
nearly as accessible as local disk.  Perhaps they even automatically
move files between local online storage and the datacomputer, giving
users the impression that everything is stored locally online.

The distinctive feature of this mode of use is that the operations are
on whole files.

A system operating in this mode uses only the ability to store,
retrieve, append, rename, do directory listings and the like.  An
obvious way to make such file level handling easily available to the
network community is to make use of the File Transfer Protocol (see
Network Information Center document #17759 -- File Transfer Protocol)
already in use for host to host file transfer.

Although such "whole file" usage of the datacomputer would be motivated
primarily by economic advantages of scale, data sharing at the file
level could also be a concern.  For example, the source files of common
network software might reside at the datacomputer. These files have

little or no structure, but their common use dictates that they be
available in a common, always accessible place.  It is taking advantage
of the economics of the datacomputer, more than anything else, since
most of these services are available on any file system.

This mode of use is mentioned here because it may account for a large
percentage of datalanguage requests.  It requires only capabilities
which would be present in datalanguage in any case; the only special
requirement is to make sure it is easy and simple to accomplish these
tasks.

2.4.4 Use of Datacomputer for File Archiving

This is another economics-oriented application.  The basic idea is to
store on the datacomputer everything that you intend to read rarely, if
ever.  This could include backup files, audit trails, and the like.

An interesting idea related to archiving is incremental archiving. A
typical practice, with regard to backing up data stored online in a
time-sharing system, is to write out all the pages which are different
than they were in the last dump.  It is then possible to recover by
restoring the last full dump, and then restoring all incremental dumps
up to the version desired.  This system offers a lower cost for dumping
and storage, and a higher cost for recovery; it is appropriate when the
probability of needing a recovery is low.  Datalanguage, then, should be
designed to permit convenient incremental archiving.

As in the case of the previous application (file system), archiving is
important as a design consideration because of its expected frequency
and economics, not because it necessarily requires any extra generality
at the language level. It may dictate that specialized mechanisms for
archiving be built into the system.

2.5 Data Sharing

Controlled sharing of data is a central concern of the project. Three
major sub-problems in data sharing are: (1) concurrent use, (2)
independent concepts of the same database, and (3) varying
representations of the same database.

Concurrent use of a resource by multiple independent processes is
commonly implemented for data on the file level in systems in which
files are regarded as disjoint, unrelated objects.  It is sometimes
implemented on the page level.

Considerable work on this problem has already been done within the

datacomputer project.  When this work is complete, it will have some
impact on the language design; by and large however, we do not consider
this aspect of concurrent use to be a language problem.

Other aspects of the concurrent use problem, however, may require more
conscious participation by the user.  They relate to the semantics of
collections of data objects, when such collections span the boundaries
of files known to the internal operating system.  Here the question of
what constitutes an update conflict is more complex.  Related questions
arise in backup and recovery. If two files are related, then perhaps it
is meaningless to recover an earlier state of one without recovering the
corresponding state of the other.  These problems are yet to be
investigated.

Another problem in data sharing is that not all users of a database
should have the same concept of that database.  Examples: (1) for
privacy reasons, some users should be aware of only part of the database
(e.g., scientists doing statistical studies on medical files do not need
access to name and address), (2) for program-data independence, payroll
programs should access only data of concern in writing paychecks, even
though skill inventories may be stored in the same database, (3) for
global control of efficiency, simplicity in application programming, and
program-data independence each application program should "see" a data
organization that is best for its job.

To further analyze example (3), consider a database which contains
information about students, teachers, subjects and also indicates which
students have which teachers for which subjects.  Depending on the
problem to be solved, an application program may have a strong
requirement for one of the following organizations:
(1) entries of the form (student,teacher,subject) with no concern about
    redundancy.  In this organization an object of any of the three
    types may occur many times.
(2) entries of the form
             (student,       (teacher,subject),
                             (teacher,subject),
                             .
                             .
                             .
                             (teacher,subject))
(3) entries of the form
             (teacher,       subject,(student...student),
                             subject,(student...student),
                             subject,(student.. .student))
and other organizations are certainly possible.

One approach to this problem is to choose an organization for stored
data, and then have application programs write requests which organize

output in the form they want.  The application programmer applies his
ingenuity in stating the request so that the process of reorganization
is combined with the process of retrieval, and the result is relatively
efficient.  There are important, practical situations in which this
approach is adequate; in fact there are situations in which it is
desirable. In particular, if efficiency or cost is an overriding
consideration, it may be necessary for every application programmer to
be aware of all the data access and organization factors.  This may be
the case for a massive file, in which each retrieval must be tuned to
the access strategy and organization; any other mode of operation would
result in unacceptable costs or response times.

However, dependence between application programs and data organization
or access strategy is not a good policy in general. In a widely-shared
database, it can mean enormous cost in the event of database
reorganization, changes to access software, or even changes in the
storage medium.  Such a change may require reprogramming in hundreds of
application programs distributed throughout the network.

As a result, we see a need for a language which supports a spectrum of
operating modes, including: (1) application program is completely
independent of storage structure, access technique, and reorganization
strategy, (2) application program parametrically controls these, (3)
application program entirely controls them. For a widely-shared
database, mode (1) would be the preferred policy, except when (a) the
application programmer could do a better job than the system in making
decisions, and (b) the need for this increment of efficiency outweighed
the benefits of program-data independence.

In evaluating this question for a particular application, it is
important to realize the role of global efficiency analysis.  When there
are many users of a database, in some sense the best mode of operation
is that which minimizes the total cost of processing all requests and
the total cost of storing the data.  When applications come and go, as
real-world needs change, then the advantages of centralized control are
more likely to outweigh the advantages of optimization for a particular
application program.

The third major sub-problem arises in connection with item level
representations.  Because of the environment in which it executes, each
application program has a preferred set of formatting concepts, length
indicators, padding and alignment conventions, word sizes, character
representations, and so on.  Once again it is better policy for the
application program to be concerned only with the representations it
wants and not with the stored data representation.  However, there will
be cases in which efficiency for a given request overrides all other
factors.

At this level of representation, there is at least one additional
consideration: potential loss of information when conversion takes
place.  Whoever initiates a type conversion (and this will sometimes be
the datacomputer and sometimes the application program) must also be
responsible for seeing that the intent of the request is preserved.
Since the datacomputer must always be responsible for the consistency
and the meaning of a shared database, there are some conflicts to be
resolved here.

To summarize, it seems that the result of wide sharing of databases is
that a larger system must be considered in choosing a data management
policy for a particular database.  This larger system, in the case of
the datacomputer, consists of a network of geographically distributed
applications programs, a centralized database, and a centralized data
management system.  The requirement for datalanguage is to provide
flexibility in the management of this larger system.  In particular, it
must be possible to control when and where conversions, data re-
organizations, and access strategies are made.

2.6 Need for High Level Communication

All of the above considerations point to the need for high level
communication between the datacomputer and its users.  The complex and
distinct nature of datacomputer hardware make it imperative that
requests be put to the datacomputer so that it can make major decisions
regarding the access strategies to be used.  At the same time, the large
amounts of data stored and the demand of some users for extremely high
transmission bandwidths make it necessary to provide for user control of
some storage and transmission schemes.  The fact that databases will be
used by applications which desire different views of the same data and
with different constraints means that the datacomputer must be capable
of mapping one users request onto another users data.  Interprocess use
of the datacomputer means that datasharing must be completely
controllable to avoid the need for human intervention. Extensive
facilities for ensuring data integrity and controlling access must be
provided.

2.6.1 Data Description

Basic to all these needs is the requirement that the data stored at the
datacomputer be completely described in both functional and physical
parameters.  A high level description of the data is especially
important to provide the sharing and control of data.  The datacomputer
must be able to map between different hardware and different
applications. In its most trivial form this means being able to convert
between floating point number representations on different machines.  On

the other extreme it means being able to provide matrix data for the
ILLIAC IV as well as being able to provide answers to queries from a
natural language program, both addressed to the same weather data base.
Data descriptions must provide the ability to specify the bit level
representations and the logical properties and relationships of data.

2.6.2 Data integrity and Access Control

In the environment we have been describing, the problems of maintaining
data integrity and controlling use of data assume extreme importance.
Shared use of datacomputer files depends on the ability of the
datacomputer to guarantee that the restrictions on data-access are
strictly enforced.  Since different users will have different
descriptions, the access control mechanism must be associated with the
descriptions themselves.  One can control access to data by controlling
access to its various descriptors.  A user can be constrained to access
a given data base only through one specific description which limits the
data he can access.  In a system where the updaters of a database may be
unknown to each other, and possibly have different views of the data,
only the datacomputer can assure data integrity.  For this reason, all
restrictions on possible values of data objects, and on possible or
necessary relationships between objects must be stated in the data
description.

2.6.3 Optimization

The decisions regarding data access strategy must ordinarily be made at
the datacomputer, where knowledge of the physical considerations is
available.  These decisions cannot be made intelligently unless the
requests for data access are made at a high level.

For example, compare the following two situations: (1) a request calls
for output of _all_ weather observations made in California exhibiting
certain wind and pressure conditions, (2) a series of requests is sent,
each one retrieving California weather observations; when a request
finds an observation with the required wind and pressure conditions, it
transmits this observation to a remote system.  Both sessions achieve
the same result: the transmission of a certain set of observations to a
remote site for processing.  In the first session, however, the
datacomputer receives, at the outset, a description of the data that is
needed; in the second, it processes a series of requests, each one of
which is a surprise.

In the first case, a smart datacomputer has the option of retrieving all
of the needed data in one access to the mass storage device.  It can
then buffer this data on disk until the user is ready to accept it.  In

the second case, the datacomputer lacks the information it needs to make
such an optimization.

The language should permit and encourage users to provide the
information needed to do optimization.  The cost of not doing it is much
higher with mass storage devices and large files than it is in
conventional systems.

2.7 Application Oriented Concerns

In the above sections we have described a number of features which the
datacomputer system must provide.  In this section we focus on what is
necessary to make these features readily available to users of the
datacomputer.

2.7.1 Datacomputer-user Interaction

An application interacts with the datacomputer in a _session_.  A
session consists of a series of requests.  Each session involves
connecting to the datacomputer via the network, establishing identities,
and setting up transmission paths for both data and datalanguage.
Datalanguage is transmitted in character mode (using network standard
ASCII) over the datalanguage connection. Error and status messages are
sent over this connection to the application program.

The data connection (called a PORT) is viewed as a bit stream and is
given its own description. These descriptions are similar to those given
for stored data.  At a minimum this description must contain enough
information for the datacomputer to parse the incoming bit stream.  It
also may contain data validation information as well.  To store data at
the datacomputer, the stored data must also have a description.  The
user supplies the mapping between the descriptions of the stored and
transmitted data.

 _____________________________________
|                                     |        / /
|  ______     ___________             |        \ \
| |      |---|           |            |        / /
| |      |   |   DATA    |            |        \ \
| |      |   |DESCRIPTION|   _______  |    DATALANGUAGE     ___________
| |      |   |___________|  |       |<-------------------->|           |
| |STORED|         |________| USER  | |        PATH        |APPLICATION|
| | DATA |__________________|REQUEST| |                    |  PROGRAM  |
| |      |                  |_______|<----!--------------->|___________|
| |      |               ___________  |   !   DATA PATH
| |      |              |           | |   !    / /
| |      |              |   PORT    |-----!    \ \
| |      |              |DESCRIPTION| |        / /
| |______|              |___________| |        \ \
|_____________________________________|        / /
                                             NETWORK
                               Figure 2-1
                A Model of Datacomputer/User Interaction

2.7.2 Application Features for Data Sharing

In using data stored at the datacomputer, users may supply a description
of the data which is customized to the application. This description is
mapped onto the description of the stored data. These descriptions may
be at different levels.  That is, one may merely rearrange the order of
certain items, while another could call for a total restructuring of the
stored representation. So that each user may be able to build upon the
descriptions of another, data entities should be given named types.
These type definitions are of course to be stored along with the data
they describe.  In addition, certain functions are so closely tied to
the data (in fact may be the data in the virtual description case -- see
section 3), that they must also reside in the datacomputer and their tie
with the data items should be maintained by the datacomputer.  For
example, one user can describe a data base as made up of structures
containing data of the types _latitude_ and _longitude_.  He could also
describe functions for comparing data of this type.  Other users, not
concerned with the structure of the _latitude_ component itself, but
interested in using this information simply to extract other fields of
interest can then use the commonly provided definitions and functions.
Furthermore, by adopting this strategy as many users as possible can be
made insensitive to changes in the file which are tangential to their
main interests.  For example, _latitudes_ could be changed from binary
representation to a character form and if use of that field were
restricted to its definitions and associated functions, existing

application systems would be unaffected.  Conversion functions could be
defined to eliminate the impact on currently operating programs.  The
ability of such definitional facilities means that groups of users can
develop common functions and descriptions for dealing with shared data
and that conventions for use of shared data can be enforced by the
datacomputer.  These facilities are discussed under _extensibility_ in
Section 3.

 ___________________________________________      _______________
|                             ____________  |    |  ___________  |
|                            |APPLICATION | |    | |APPLICATION| |
|                           _|    DATA    |_|____|_|  PROGRAM  | |
|                          | |DESCRIPTIONS| |    | |___________| |
|                          | |____________| |    |_______________|
|                          |       ^        |          HOST 1
|  ______                  |       |        |
| |      |                 |  _____|______  |
| |      |                 | |    DATA    | |
| |      |                 | | FUNCTIONS  | |
| |      |                 | |____________| |     _______________
| |      |   ___________   |  ____________  |    |  ___________  |
| |      |  |  STORED   |__| |            | |    | |APPLICATION| |
| |      |__|   DATA    |____|            |_|____|_|  PROGRAM  | |
| |STORED|  |DESCRIPTION|__  |            | |    | |___________| |
| | DATA |  |___________|  | |____________| |    |               |
| |      |        ^        |  ____________  |    |  ___________  |
| |      |        |        | |            | |    | |APPLICATION| |
| |      |   _____|_____   | |            |_|____|_|  PROGRAM  | |
| |      |  |   DATA    |  |_|            | |    | |___________| |
| |      |  | FUNCTIONS |    |____________| |    |_______________|
| |______|  |___________|                   |          HOST 2
|___________________________________________|
                DATACOMPUTER

                               Figure 2-2
            Multiple User Interaction with the Datacomputer

2.7.3 Communication Model

We intend that datalanguage, while at a high level conceptually, will be
at a low level syntactically.  Datalanguage provides a set of primitive
functions, and a set of commonly used higher level functions (see
section 4 on the datalanguage model).  In addition, users can define
their own functions so that they can communicate with the datacomputer
at a level as conceptually close to the application as possible.

There are two reasons for datalanguage being at a low level
syntactically.  First, it is undesirable to have programs composing
requests into an elaborate format only to be decomposed by the
datacomputer.  Second, by choosing a specific high level syntax, the
datacomputer would be imposing a set of conventions and terminology
which would not necessarily correspond to those of most users.

   DATACOMPUTER ENVIRONMENT     |      OUTSIDE ENVIRONMENT

                                |           _______
                                           |       |____
                                |        __|GENERAL|____
                                        |  |  DMS  |____
                                |       |  |_______|
 _________     ________     _________   |
|         |   | HIGHER |   |         |__|   _______     ________
|PRIMITIVE|___| LEVEL  |___|LOW-LEVEL|_____|COBOL  |   | COBOL  |
|LANGUAGE |   |LANGUAGE|   | SYNTAX  |__   |SERVER |___|PROGRAM |
|_________|   |________|   |_________|  |  |_______|   |________|
                                |       |   _______
                                        |__|ON LINE|
                                |          | QUERY |_______
                                           |_______|       |
                                |                       ___|____
                                                       |TERMINAL|
                                |                      | USERS  |
                                                       |________|
                                |
                                         APPLICATION  APPLICATIONS
                                |          SERVERS

                               Figure 2-3
                 Datacomputer/User Working Environment

2.8 Summary

In this section we have presented the major considerations which have
influenced the current datalanguage design effort.  The datacomputer has
much in common with most large-scale shared data management systems, but
also has a number of overriding concerns unique to the datacomputer
concept.  The most important of these are the existence of a separate
box containing both hardware and software, the control of an extremely
large storage device, and embedding in a computer network environment.
Data sharing in such an environment is a central concern of the design.
Both extensive data description facilities and high level communication

between user and datacomputer are necessary for data integrity and for
datacomputer optimization of user requests.  In addition, the expected
use of the datacomputer involves satisfying several conflicting
constraints for different modes of operation.  One way of satisfying
various user needs is to provide datalanguage features so that users may
develop their own application packages within datalanguage.

3. Principal Language Concepts

This section discusses the principal facilities of datalanguage.
Specific details of the language are not presented, however, the
discussion includes the motivation behind the inclusion of the various
language features and also defines, in an informal way, the terms we
use.

3.1 Basic Data Items

Basic data are the atomic level of all data constructions; they cannot
be decomposed.  All higher level data structures are fundamentally
composed of basic data items.  Many types of basic data items will be
provided.  The type of an item determines what operations can be
performed on the item and the meaning of those operations.  Datalanguage
will provide those primitive types of data items which are commonly used
in computing systems to model the real world.

The following basic types of data will be available in datalanguage:
_fixed_point_numbers_, _floating_point_numbers_, _characters_,
_booleans_, and _bits_. These types of items are "understood" by the
datacomputer system to the extent that operations are based on the type
of an item.  Datalanguage will also include an _uninterpreted_ type of
item, for data which will only be moved (including transmitted) from one
place to another. This type of data will only be understood in the
trivial sense that the datacomputer can determine if two items of the
uninterpreted type are identical.  Standard operations on the basic
types of items will be available.  Operations will be included so that
the datacomputer user can describe a wide range of data management
functions.  They are not included with the intent of encouraging use of
the datacomputer for the solving of highly computational problems.

3.2 Data Aggregates

Data aggregates are compositions of basic data items and possibly other
data aggregates.  The types of data aggregates which are provided allow
for the construction of hierarchical relationships of data.  The
aggregates which will definitely be available are classified as
_structs_, _arrays_, _strings_, _lists_, and _directories_.

A struct is a static aggregate of data items (called _components_).  A
struct is static in the sense that the components of a struct cannot be
added or deleted from the struct, they are inextricably bound to the
struct.  Associated with each component of the struct is a name by which
that component may be referenced relative to the struct.  The struct
aggregate may be used to model what is often thought of as a record,

with each component being a field of that record.  A struct can also be
used to group components of a record which are more strongly related,
conceptually, than other components and may be operated on together.

Arrays allow for repetition in data structures.  An array, like a
struct, is a static aggregate of data items (called _members_). Each
member of an array is of the same type.  Associated with each member is
an index by which that member can be referenced relative to the array.
Arrays can he used to model repeating data in a record (repeating
groups).

The concept of string is actually a hybrid of basic data and data
aggregates.  Strings are aggregates in that they are compositions
(similar to arrays) of more primitive data (e.g., characters). They are,
however, generally conceived of as basic in that they are mostly viewed
as a unit rather than as a collection of items, where each item has
individual importance. Also the meaning of a string is highly dependent
on the order of the individual components.  In more concrete terms,
there are operations which are defined on specific types of strings.
For example, the logical operators (_and_, _or_, etc.) are defined to
operate on strings of bits.  However, there are no operations which are
defined on arrays of bits, although there are operations defined on both
arrays, in general, and on bits.  Strings of characters, bits, and
uninterpreted data will be available in datalanguage.

Lists are like arrays in that they are collection of similar members.
However, lists are dynamic rather than static.  Members of a list can be
added and deleted from the list.  Although, the members of a list are
ordered (in fact more than one ordering can be defined on a list), the
list is not intended to be referenced via an index, as is the case with
an array.  Members of a list can be referenced via some method of
sequencing through the list.  A list member, or set (see discussion
under virtual data) of members, can also be referenced, by some method
of identification by content.  The list structure can be used to model
the common notion of a file.  Also restrictive use of lists as
components of structs provides power with respect to the construction of
dynamic hierarchical data relationships below the file level.  For
example, the members of a list may themselves be, in part, composed of
lists, as in a list of families, where each family contains a list of
children as well as other information.

Directories are dynamic data aggregates which may contain any type of
data item.  Data items contained in a directory are called _nodes_.
Associated with each node of a directory is a name by which that data
item can be referenced relative to the directory. As with lists, items
may be dynamically added to and deleted from a directory.  The primary
motivation behind providing the directory capability is to allow the
user to group conceptually related data together.  Since directories

need not contain only file type information, "auxiliary" data can be
kept as part of the directory.  For example, "constant" information,
like salary range tables for a corporation data base; or user defined
operations and data types (see below) can be maintained in a directory
along with the data which may use this information.  Also directories
may themselves be part of a directory, allowing for a hierarchy of data
grouping.

Directories will also be defined so that system controlled information
can be maintained with some of the subordinate items (e.g. time of
creation, time of update, privacy locks, etc.).  It may also be possible
to allow the data user to define and control his own information which
would be maintained with the data. At the least, the design of
datalanguage will allow for parametric control over the information
managed by the system.

Directories are the most general and dynamic type of aggregate data.
Both the name and description (see below) of directory nodes exist with
the nodes themselves, rather than as part of the description of the
directory.  Also the level of nesting of a directory is dynamic since
directories can be dynamically added to directories.  Directories are
the only aggregate for which this is true.

Datalanguage will also provide some specific and useful variations of
the above data aggregates.  Structs will be available which allow for
optional components. In this case the existence of a component would be
based on the contents of other components.  It may also he possible to
allow for the existence to be based on information found at a higher
level of data hierarchy.  Similarly, components with _unresolved_ type
will be provided.  That is the component may be one of a fixed number of
types.  The type of the component would be based on the contents of
other components of the struct.  It is also desirable to allow the type
or existence of a component to be based on information other than the
contents of other components.  For instance, the type of one component
might be based on the type of another component.  In general, we would
like for datalanguage to allow for the attributes (see below) of one
item to be a function of the attributes of other items.

We would also like to provide mixed lists.  Mixed lists are lists which
contain more than one type of member.  In this case the members would
have to be self defining.  That is, the type of all member would have to
be "alike" to the degree that information which defines the type of that
member could be found.

Similar to components whose type is unresolved are Arrays with
unresolved length.  In this case, information defining the length of the
array must be carried with the array or perhaps with other components of
an aggregate which encompasses the array.

In all of the above cases the type of an item is unresolved to some
degree and information which totally resolves the type is carried with
the item.  It is possible that in some or perhaps all of these cases the
datacomputer system could be responsible for the maintenance of this
information, making it invisible to the data user.

3.3 General Relational Capabilities

The data aggregates described above allow for the modeling of various
relationships among data.  All relationships which can be constructed
are hierarchical.

Two approaches can he taken to provide the capability of modeling non-
hierarchical relationships.  New types of data aggregates can be
introduced which will broaden the range of data relationships
expressible in datalanguage.  Or, a basic data type of "pointer" can be
introduced which will serve as a primitive out of which relations can be
represented.  Pointer would be a data type which establishes some kind
of correspondence from one item to another.  That is, it would be a
method of finding one item, given another . Providing the ability to
have items of type pointer does not necessitate the introduction of the
concept of address which we deem to be a dangerous step.  For example,
an item defined to point to a record in a personnel file could contain a
social security number which is contained in each record of the file and
uniquely identifies that record.  In general a pointer is an item of
information which can be used to uniquely identify another item.

While the pointer approach provides the greater degree of flexibility,
it does this at the price of relegating much of the work to the user as
well as severely limiting the amount of control the datacomputer system
has over the data.  A hybrid solution is possible, where some new
aggregate data types are provided as well as a restricted form of
pointer data type.  While the approach to be taken is still being
studied, the datalanguage design will include some method of expressing
non-hierarchical data structures.

3.4 Ordering of Data

Lists are generally viewed as ordered.  It is possible, however, that a
list can be used to model a dynamic collection of similar items which
are not seen as ordered.  The unordered case is important, in that,
given this information the datacomputer can be more efficient since new
members can be added wherever it is convenient.

There are a number of ways a list can be ordered.  For instance, the
ordering of a list can be based on the contents of its members.  In the

simplest case this involves the contents of a basic data item.  For
example, a list of structs containing information on employees of a
company may be ordered on the component which contains the employee's
social security number. More complex ordering criteria are possible.
For example, the same list could be ordered alphabetically with respect
to the employee's last name.  In this case the ordering relation is a
function of two items, the last and first names.  The user might also
want to define his own ordering scheme, even for orderings based on
basic data items.  An ordering could be based on an employee's job title
which might even utilize auxiliary data (i.e. data external to the
list).  It is also possible to maintain a list in order of insertion.
In the most general case, the user could dynamically define his ordering
by specification of where an item is to be placed as part of his
insertion requests.  In all of the above cases, data could be maintained
in ascending or descending order.

In addition to maintenance of a list in some order, it is possible to
define one or more orderings "imposed" on a list.  These orderings must
be based on the contents of a list's members.  This situation is similar
to the concept of virtual data (see below) in that the list is not
physically maintained in a given order, but retrieved as if it were.
Orderings of this type can be dynamically formed (see discussion of set
under virtual data).  Imposed orderings can be accomplished via the
maintenance of auxiliary structures (see discussion under internal
representation) or by utilization of a sorting strategy on retrievals.
Much work has been done with regard to effective implementation of the
maintenance and imposition of orderings on lists.  This work is
described in working paper number 2.

3.5 Data Integrity

An important feature of any data management system is the ability to
have the system insure the integrity of the data.  Data needs to be
protected against erroneous manipulation by people and against system
failure.

Datalanguage will provide automatic validity checks.  Many flavors need
to be provided so that appropriate trade-offs can be made between the
degree of insurance and the cost of validation.  The datalanguage user
will be able to request constant validation: where validity checks are
made whenever the data is updated; validation on access: where validity
checks are performed when data is referenced but before it is retrieved;
regularly scheduled validation: where the data is checked at regular
intervals; background validation: where the system will run checks in
its spare time; and validation on demand.  Constant validation and
validation on access are actually special cases of the more general
concept of event triggered validation.  In this case the user specifies

an event which will cause data validation procedures to be invoked. This
feature can be used to accomplish such things as validation following a
"batch" of updates.  Also, some mechanism for specifying combinations of
these types would be useful.

In order for some of the data validation techniques to be effective, it
may be necessary to keep some data validation "bookkeeping" information
with the data.  For example, information which can be used to determine
whether an item has been checked since it was last updated might be used
to cause validation on access if there has not been a recent background
validation.  The datacomputer may provide for optional automatic
maintenance of such special kinds of information.

In order for the datacomputer system to insure data validity, the user
must define what valid is.  Two types of validation can be requested. In
the first case the user can tell the datacomputer that a specific data
item may only assume one of a specific set of values.  For example, the
color component of a struct may only assume the values 'red', 'green',
or 'blue'.  The other case is where some relation must hold between
members of an aggregate.  For example, if the sex component of a struct
is 'male' then the number of pregnancies component must be 0.

Data validation is only half of the data integrity picture. Data
integrity involves methods of restoring damaged data.  This requires
maintenance of redundant information.  Features will be provided which
will make the datacomputer system responsible for the maintenance of
redundant data and possibly even automatic restoration of damaged data.
In section 2 we discussed possible uses of the datacomputer for file
backup.  All features which are provided for this purpose will also be
available as methods of maintaining backup information for restoration
of files residing at the datacomputer.

3.6 Privacy

Datalanguage will have to provide extensive privacy and protection
capabilities.  In its simplest form a privacy lock is provided at the
file level.  The lock is opened with a password key.  Associated with
this key is a set of privileges (reading, updating, etc.). Two degrees
of generality are sought.  Privacy should be available at all levels of
data.  Therefore, groups of related data, including groups of files
could be made private by creating private directories.  Also, specific
fields of records could be made private by having private components of
a struct where other components of the struct are visible to a wider (or
different) class of users.  We would also like the user to be able to
define his own mechanism.  In this way, very personalized, complex, and
hence secure mechanisms can be defined.  Also features such as 'everyone
can see his own salary' might be possible.

3.7 Conversion

Many types of data are related in that some or all of the possible
values of one type of data have an "obvious" translation to the values
of another.  For example, the character '6' has a natural translation to
the integer 6, or the six character string 'abc   ' (three trailing
blanks) has a natural translation to the four character string 'abc '
(one trailing blank). Datalanguage will provide conversion capabilities
for the standard, commonly called for, translations. These conversions
can be explicitly invoked by the user or implicitly invoked when data of
one type is needed for an operation but data of another type is
provided.  In the case of implicit invocation of conversion of data the
user will have control over whether conversion takes place for a given
data item. More generally we would like to provide a facility whereby
the user could specify conditions which determine when an item is to be
converted.  Also, the user should be able to define his own conversion
operations, either for a conversion between types which is not provided
by the datacomputer system or to override the standard conversion
operation for some or all items of a given type.

3.8 Virtual and Derived Data

Often, information important to users of data is embedded in that data
rather than explicitly maintained.  For example, the dollar value of an
individual's interest in a company in a file of stock holders.  Since
the value of the company changes frequently, it is not feasible to
maintain this information with each record. It is useful to be able to
use the file as if information of this type was part of each record.
When referencing the dollar value field of a record, the datacomputer
system would automatically use information in the record, such as
percentage of ownership in the company, possibly in conjunction with
information which is not part of the record but is maintained elsewhere,
such as company assets, to compute the dollar value.  In this way the
data user need not be concerned with the fact that this information is
not actually maintained in the record.

The _set_, which is a specific type of virtual container in
datalanguage, deserves special mention.  A set is a virtual list. For
example, suppose there is a real list of people representing some
population sample.  By real (or actual) data we mean data which is
physically stored at the datacomputer.  A set could be defined to
contain all members of this list who are automobile owners.  The set
concept provides a powerful feature for viewing data as belonging to
more than one collection without physical duplication.  Sets are also
useful, in that, they can be dynamically formed.  Given an actual list,
sets based on that list can be created without having been previously
described.

As mentioned above, virtual data can be very economical.  These
economies may become most important with respect to the use of sets.
Savings are found not only in regard to storage requirements, but also
in regard to processing efficiency. Processing time can be reduced as a
result of calculations being performed only when the data is accessed.
The ability to obtain efficient operation by optimization becomes
greater when virtual data is defined in terms of other virtual data.
For sets, large savings may be realized by straight forward
"optimization" of the nested calculations.

The above ideas are made more clear by example. Having created a set of
automobile owners, A, a set of home owners, HA, can be defined based on
A.  The members of HA can be produced very efficiently, in one step, by
retrieving people who are both automobile owners and home owners.  This
is more efficient than actually producing the set, A and then using it
to create HA.  This is true when one or both pieces of information
(automobile ownership and home ownership) are indexed (see discussion
under internal representation) as well as when neither is indexed.

The same gains are achieved when operations on virtual data are
requested.  For example, if a set, H, had been defined as the set of
homeowners based on the original list of people, the set, HA, could have
been defined as the intersection (see discussion on operators) of A and
H.  In this case too, HA can be calculated in one step.  Use of sets
allows the user to request data manipulations in a form close to his
conceptual view, leaving the problem of effective processing of his
request to the datacomputer.

Another use of virtual data is to accomplish data sharing.  An item
could be defined, virtually, as the contents of another item.  If no
restriction is placed on what this item can be, we have the ability to
define two paths of access to the same data.  Hence, data can be made
subordinate to two or more aggregate structures. Stated another way,
there are two or more paths of access to the data.  This capability can
be used to model data which is part of more than one data relationship.
For example, two files could have the same records without maintaining
duplicate copies.

It will also be possible, via data sharing to look at data in different
ways.  Shared data might behave differently depending on how (and
ultimately by whom) it is accessed.  Although, the ability to have
multiple paths to the same data and the ability to have data which is
calculated on access are both part of the general virtual data
capability, datalanguage will probably provide these as separate
features, since they have different usage characteristics.

Derived data is similar to virtual data in that it is redundant data
which can be calculated from other information.  Unlike virtual data it

is physically maintained.  The user can choose between virtual and
derived data as a result of considering trade-offs based on: estimated
cost of calculation; frequency of update; estimated cost of storage; and
frequency of access.  For example, suppose a file contains a list of
budgets for various projects in a department.  The departmental budget
can be calculated as a function of the individual project budgets.  This
information might be defined as derived data since it is expected to be
updated infrequently (e.g., once a year), while it is expected to be
accessed relatively often.

Options will be provided which give the user control with regard to when
the calculation of derived data is to be done.  These options will be
similar to those provided for control of data validity operations.  The
data validation and derived data concepts are similar in that some
operation must be performed on related data.  In the case of data
validation, the information derived is the condition of data.

3.9 Internal Representation

To this point, we have discussed only the high level, logical, aspects
of data.  Since data, at any given time, must reside on some physical
device a representation of the data must be chosen.  In some cases it is
appropriate to leave this choice to the datacomputer system.  For
example, the representation of information which is used in the process
of transmitting other data, but which itself resides solely at the
datacomputer may not be of any concern to the user.

However, it is important that the user be capable of controlling the
choice of representation.  In any application which requires mostly
transmission of data rather than interpretation of the data by the
datacomputer, the data should be maintained in a form consistent with
the system which communicates with the datacomputer.  With respect to
basic types of data, datalanguage will provide most representations
commonly used in systems with which it interacts.  For some types (e.g.,
fixed point) this will be accomplished by providing for parametric
(e.g., sign convention, size) description of the representation.  In
other cases (e.g., floating point) specific representations will be
offered (e.g., system 360 short floating point, system 360 long floating
point, pdp-10 floating point, etc.).

Another aspect of the internal representation problem regards aggregate
structures.  The method chosen to represent aggregate structures may
largely affect the cost of manipulating the data.  The user must have
control over this representation since only he has any idea of how the
data is to be used.  Datalanguage will provide a variety of
representational options which will allow for efficient implementation
of data structures.  This includes the availability of auxiliary

structures, automatically maintained by the data computer system.  These
structures can be used to effect efficient retrieval of subsets of data
collections based on the contents of the members (i.e. the common
concept of indices), efficient maintenance of orderings on a collection
of data, maintenance of redundant information for the purpose of data
integrity, and efficient handling of shared data whose behavioral
characteristics are dependent on the path of access.  It should be noted
here that, the datalanguage design effort, will attempt to provide
methods whereby the data user can describe the expected use of his data,
so that details of internal representation can be left to the
datacomputer.

3.10 Data Attributes and Data Classes

The type of an item determines the operations which are valid on that
item and what they mean.  _Data_attributes_ are refinements on the type
of data.  The data attributes affect the meaning of operations. For
example, we would like to provide for the option of defining fixed point
items to be scaled.  The scale factor, in this case, would be an
attribute of fixed point data. It effects the meaning of operations on
that data. The attribute concept is useful in that it allows information
concerning the manipulation of an item to be associated with the item
rather than with the invocation of all operations on that item.

The attribute concept can be applied to aggregate as well as basic data.
For example, one attribute of a list could define where a new member is
to be inserted.  Options might be: insert at the beginning of the list;
insert at the end of the list; or insert in some order based on the
contents of the member.  Adding a new member to a list with one of the
above attributes could be done by issuing a simple insert request
without having to specify where the new member is to be inserted.

The _data_class_ concept is actually the inverse of the data attribute
concept.  A data class is a collection of data types.  The data class
concept allows for definition of operations, independent of specific
type of an item.  For example, by defining the data class arithmetic to
be composed of fixed point and floating point types of data, the
comparison operators (_equal_, _less_than_, etc.) can be defined to
operate on arithmetic data, independent of whether it is fixed or
floating point. Also the concept of data aggregate can be seen as a
class encompassing directories, lists, etc.  As there are operations
defined on arithmetic data, there are also operations defined on
arbitrary aggregates.

The inverse relationship between data classes and data attributes is
very strong.  For example, the concept of list can be seen as a data
class, encompassing all types of lists (e.g., lists of integers, lists

of character strings, etc.), independent of the types of their members.
The type of a list's members (e.g., integer, character string, etc.) are
then seen as attributes.  Data attributes and classes are also relative
concepts.  While the concept of list can be viewed as a data class, it
can also be seen as an attribute, relative to the concept of data
aggregate.

3.11 Data Description

A _data_description_ is a statement of the properties (see discussion of
attributes) of a data item.  Examples of properties which are recorded
in a description are: the name of an item; its size; its data type; its
internal representation; privacy information; etc.

Datalanguage will contain mechanisms for specifying data descriptions.
These descriptions will be processed by the data computer, and used
whenever the data item is referenced.  The user will be able to
physically create data only by first specifying their descriptions.  The
properties of a description can be divided into groups according to
their function. Some have the function of specifying details of
representation, which will not be of interest to most users, while
others, such as the name are of almost universal interest.

All user data is a part of some larger (user or system) data structure.
The structures containing data establish a path of access to the data.
In the process of following this path the datacomputer system must
accrue a complete description of the data item.  For example, the
description of a data item of a directory may be found associated with
that node of the directory.  Members of a list or array are described as
part of the description of the list or array. We must dispose of two
seeming exceptions.  First, while aspects of data may (on user request)
be left to the system, those aspects are still described, they are
described by the system.  As discussed above, some data will be, to some
degree, self describing (e.g. members of mixed lists).  However, it is
fully described in some encompassing structure, in that a method of
determining the full description is described.

It is worth noting here that the sooner a complete description is found
in the path of access, the more effective the datacomputer is likely to
be in processing requests which manipulate a data item.  However, the
ability to have data whose complete description does not exist at high
levels of the access path provides greater flexibility in the definition
of data structures.

3.12 Data Reference

Data cannot be manipulated unless it can be referenced.  In the same way
that data cannot exist without its being described, it cannot exist
unless there is a path of access to the data. The method of data
reference is to define the path of access to the data.  As mentioned
above, there is a method of referencing any item relative to the data
aggregate which contains it.  Nodes of directories and components of
structs are referenced via the name associated with the node or
component.  Members of arrays are referenced via the index associated
with the member.  Members of lists are referenced via some method of
specifying the position of the member or by uniquely identifying the
member by content.  To reference any arbitrary data item the path of
access must be fully defined by either explicit or implicit definition
of each link in the chain.  In the case of virtual data there is an
extra implicit link in the chain, that being the method employed to
obtain the data from other data items.  It should be noted also that if
pointers are provided (see discussion on general relational
capabilities) they can also serve as a link in the chain of access to an
item.

The design of datalanguage will ease the problem (and reduce the cost)
of referencing data items by providing methods whereby part of the
access path can be implicitly defined.  For example, datalanguage will
provide a concept of "context".  During the course of interacting with
the datacomputer, levels of context can be set up so that data can be
referenced directly, in context.  For example, on initiating a session
the user may (in fact will probably be required to) define a directory
which will be the context of that session.  All items subordinate to
this directory can be referenced directly in this context.  Another
feature will be partial qualification.  Each level of struct need not be
mentioned in order to reference an item embedded in a deep nest of
structs.  Only those intermediate levels which are sufficient to
uniquely identify the item need be specified.

3.13 Operations

In this section we discuss the builtin functions of datalanguage which
are of central importance in manipulating data.  Functions which operate
on items, functions which operate on aggregates, primitive functions and
high-level functions are discussed.

Of the primitives which operate on items, those of most interest are
assignment, comparisons, logicals, arithmetics and conversion functions.

Primitive assignment transfers a value from one item to another; these
items must be of the same type.  When they are of different types,

either conversion must be performed, or some non-primitive form of
assignment is involved.

The comparison operators accept a pair of items of the same type, and
return a boolean object which indicates whether or not a given condition
obtains.  The type determines how many different conditions can be
compared for.  A pair of numeric items can be compared to see which is
greater, while a pair of uninterpreted items can be compared only for
equality.  In general, a concept of "greater than" is builtin for a
datatype only if it is a very widely applied concept.  The comparison
operators are used in the construction of inclusion conditions when
defining subsets of aggregate data.

The result of a comparison operation is a boolean item: one whose value
is either TRUE or FALSE.  Logical primitives are provided and
generalized boolean functions can be constructed from them.  With
logical and comparison operators, complex conditions for inclusion of
objects in sets can be specified.

Arithmetic operators will be available for the manipulation of numeric
data.  Here, we are not interested in generalized computation, but in
applications of arithmetic in data selection, space allocation,
subscript calculation, iteration control, etc.

Conversion is an important part of generalized data translation, and we
are interested in providing a substantial builtin conversion facility.
In particular, we will want to provide an efficient system routine for
each "standard" or widely-used conversion function.  Of particular
importance are conversions to and from character string data; in
character string representation of, for example, numeric items, there
are many possible formats corresponding to a single data type.
Conversion between character sets and dealing with padding and
truncation are viewed as conversion problems.

There are two principal classes of primitive operators defined on
aggregates:  those related to data reference (see previous section) and
those which add and delete components.  Changing an existing component
is accomplished through assignment, and is an operation on the
component, not the aggregate.

Addition and deletion of components is defined only for aggregates which
are not inherently static in composition.  Thus one can add a component
to a LIST, but not to an ARRAY.  To specify deletion it is necessary to
specify which component is to be deleted, and from which aggregate (in
the case that it is shared).  Addition requires specification of new
component, aggregate, and sometimes auxiliary information.  For example,
some aggregate types would permit addition of new components anywhere in
the structure; in these a position must be indicated, relative to any

existing components.

Often it is desirable to operate on some of the members of a list, or to
treat a group of members as a list in its own right.  For example, it
might be common to transmit to a remote program for analysis, the
medical history of patients developing heart disease before the age of
30. These may be just a few of the members of a large list of patients.

In this case, the operation to be performed is transmission to the
remote system; this operation is performed on several members of the
list of patients.  The ones to be transmitted are thought of as a _set_;
the set is specified as containing all the members of a given list
satisfying two conditions: (1) age less than 30, and (2) has heart
disease.

Sets can be defined explicitly, or implicitly simply with appropriate
reference mechanisms.  _Definition_ of a set is distinct from
_identification_of_membership_, which is distinct from
_access_to_membership_.  Definition involves specifying the candidates
for set membership and specifying a rule by which members of the set can
be distinguished from non-members; for example, an inclusion condition
such as "under 30 with heart disease".  Identification involves
effective application of the rule to all candidates for membership.
When the membership has been identified, it can be counted, but the data
itself has not necessarily been accessed. When a member is accessed, its
contents can be operated on.

Primitives to accomplish each of these operations on a set will be
provided; however, it will ordinarily be optimal for the datacomputer to
determine when each step should be performed.  To enable users to
operate at a level at which the datacomputer can optimize effectively,
higher-level operators on sets will be provided.  Some of these are
logical operators, such as union and intersection.  These input and
output sets.  Also available is an operator which complements a set
(since the definition establishes all possible candidates, a set always
has a well-defined complement).

These higher level operators can be applied to any defined set; the set
members need not be identified or accessed.  The system will perform
such operations without actually accessing members if it can.

Some of the other operators on sets are counting membership,
partitioning a set into a set of sets, uniting a set of sets into a set.
A set can be used to reference another set, providing there is a well-
defined way to identify members of the second set given the first set.
For example, a set C may contain all the children doing poorly in
school.  A set F may be defined, where the members of F are the records
about families having a child in set C.

Some other useful operations on sets are: adding all the members of a
set to an aggregate, deleting all the members of a set (frequently such
a massive change can be performed far more efficiently than the same set
of changes individually requested), changing all the members of a set in
a given way.

A set can be made into a list, by actually accessing each member and
physically collecting them.

Some of the operations on lists are: concatenation of lists into larger
lists, division of a list into smaller lists, sorting a list, merging a
pair of ordered lists (preserving order).

This is not intended to be a full enumeration of high-level operations,
but to be suggestive.  We are planning to build in high-level functions
for operations which are used very commonly, and can be implemented
within the system significantly better than they can be implemented by
users in the language.  For most of the functions mentioned here,
considerable knowledge is accumulated on good implementations.  In
particular, the techniques used for inverted file access provide many
set operations to be performed without actual access to the data.

3.14 Control

The control features of datalanguage are to the basic operations as data
aggregates are to the basic data items.  Control features are used to
create complex requests out of the basic requests provided by
datalanguage.

Conditional requests allow the user to alter the normal request flow by
specifying that certain requests are to be executed under certain
conditions.  In general datalanguage will provide the ability to chose
at most one of a number of requests to be made based on some set of
conditions or the value of some item.  In its simplest form the
conditional allows for optional execution of a given request.

Iterative requests cause a request (called the body) to be executed a
fixed or variable number of times or until a given condition is met.
Datalanguage will provide iterative requests that will allow for similar
manipulations to be performed on all members of some aggregate structure
as well as the standard type of iterative request based on counters.  By
providing a capability of directly expressing manipulations on
aggregates which require processing all of the items subordinate to the
aggregate, the datacomputer can be more efficient in processing user
requests.  For example, a user defined conversion process which operates
on character strings, can be implemented far more efficiently if the
datacomputer is explicitly informed that the process requires sequential

processing of the characters.  Datalanguage will also provide for
parallel iteration. For example, the user will be able to specify
operations which require sequencing through two or more lists in
parallel.  This would be done if the contents of one file were to be
updated based on a file of correction information.

Compound requests are collections of requests which act as one.  They
are primarily provided to allow for the conditional performance of or
iteration on more than one statement.  Compound requests also provide
request reference points which can be used to control the request
processing flow.  That is, compound requests can be "named". The
datalanguage user will be able to specify control information which will
conditionally cause a compound request to be exited. By providing
naming, the user may cause any number of previously entered compound
requests to be exited.

We do not intend to provide the traditional _goto_ capability.  By not
including a goto request, the chances for efficient operation (via
optimization) of the datacomputer are increased. We also hope, in this
way, to force the datalanguage user to specify his data manipulations in
a clear sty1e.

Two forms of the compound request will be provided, ordered and
unordered.  In the unordered case the user is informing the datacomputer
that the requests can be performed in any order.  This should allow the
datacomputer to perform more efficiently and might even allow for
parallel processing.

During a session with the datacomputer it is likely that a user will
find a need for temporary data.  That is, data which is used to
remember, for a short term, information which is needed for the
processing of requests. This short term might be a session or a small
part of a session. Datalanguage will provide a temporary data facility.
Temporary data will be easy to create, use and dispose of.  This will be
accomplished by allowing the system to (optionally) make many decisions
regarding the data.  For example the representation of a temporary
integer item will often be of no concern to the user.  Some features
which are provided for permanent data will be deemed irrelevant with
regard to temporary data.

Temporary data will be associated with a collection of requests in what
will be called a block.  A block will be no different than a compound
request with the exception that data is defined with the requests which
compose it and is automatically created on entrance to the block and
destroyed on exiting the block.

3.15 Extensibility

The goals of datalanguage are to provide facilities of data structure at
two levels.  At one level the user may take advantage of high level data
capabilities which will do much of his data management work
automatically and which allows for the data computer to operate more
effectively in some cases since it has been given control of the data.
At another level, however, features are provided which allow the user to
describe his application in terms of primitive concepts.  In this way
the datacomputer user may compose a large variety of data constructs and
has great flexibility with respect to the manipulations he can perform
on his data. Also by interacting with the datacomputer at the primitive
level, the user can exercise a good deal of control over the methods
employed by the datacomputer which may result in more effective usage of
resources for non-standard applications.  Datalanguage will provide
features which allow the user to create an environment whereby the
datacomputer system appears to provide features especially tailored to
his application.

The control features discussed above allow the user to extend the
operations available on data by appropriate composition of the
operations.  Datalanguage will provide a method of defining a composite
request to be a new request (called a _function_).  In this way a new
operation on specific data can be defined once and then used repeatedly.
In order that the user may define general operations, datalanguage will
provide functions which can be parameterized.  That is, functions will
not only be able to operate on specific data but may be defined to work
on any data of a specific type.  This capability will not be limited to
basic data types (e.g. integers) or even specific aggregate types (e.g.
array of integers) but will also include the ability to define functions
which operate on classes of data.  For example, functions can be defined
which operate on lists independent of the type of the list members.
Also provided, will be the ability to expand and modify existing
functions as well as creating new functions.  This includes expanding
the types of data for which a function is defined or modifying the
behavior of a function for certain types of data.

As with operations, the data aggregates discussed above allow the user
to extend the primitive data types by appropriate composition.  For
example, a two dimensional array of integers can be created by creating
an array of arrays of integers.  The situation for data types is
analogous to that of operations. Datalanguage will provide the ability
to define a composition of data to be a new data type.  Also the
capability of defining general data structures will be provided by
essentially parameterizing the new data definition.  This would allow
the general concept of two dimensional array to be defined as an array
of arrays. Once defined, one could create two dimensional arrays of
integers, two dimensional arrays of booleans, etc.  As with functions

there is also a need to expand or modify existing data types.  One might
want to expand the attributes which apply to a given data type, in that
he might want to add new attributes, or add new choices for the existing
attributes.

The control features can be extended also.  Special control features
might be needed to process a data structure in a special way or to
process a user defined data structure.  For example, if a tree type data
structure has been defined in terms of lists of lists, the user might
like to define a control function which causes a specified operation to
be performed on each item of a specified tree.  As with data types and
functions, there is a need to be able to modify and extend existing
control features as well as the ability to create new ones.

Datalanguage will provide the ability to treat data descriptions and
operations in much the same way that data is treated.  One can describe
and manipulate descriptions and operations in the same way that he can
describe and manipulate data.  It is impossible to talk about data types
without consideration of operations and equally as impossible to talk
about operations without an understanding of the data types they operate
on.  In order for the user to be able to effect the behavior of the
datacomputer system, the design of datalanguage will include a
definition of the operational cycle of the datacomputer.  Precise
definitions of all aspects of data (data attributes, data classes,
relationship of aggregates to their subordinate items, etc.) in terms of
their interaction with datalanguage operations will be made.  In this
way the datacomputer can offer tools which will give the datacomputer
user the ability to be an active participant in the design of the
datalanguage which he uses.

4. A Model for Datalanguage Semantics

For the purpose of defining and experimenting with language semantics
and with language processing techniques, we are developing a model
datacomputer.

The principal elements of the model are the following:
(1) A set of primitive functions
(2) An environment in which data objects can be created, manipulated and
    deleted, using the primitives
(3) A structure for the representation of collections of data values,
    their descriptions, their relationships, and their names.
(4) An interpreter which executes the primitives
(5) A compiler which inputs requests in a very simple language, performs
    binding and macro expansion operations, and generates calls to the
    internal semantic primitives.

If our modeling efforts are successful, the model will evolve until it
accepts a language like the datalanguage whose properties we have
described in sections 2 and 3 of this paper.  Then the process of
writing the final specification will simply require reconciliation of
details not modeled with structure that has been modeled.  One rather
large detail which we may never handle within the model is syntax; in
this case reconciliation will be more involved; however, we firmly
believe that the semantic structure should determine the syntax rather
than the opposite, so we will be in the proper position to handle the
problem.

By constructing a model for each of the elements listed above, we are
"implementing" the language as we design it, in a very loose sense.  In
effect, we work in a laboratory, rather than working strictly on paper.
Since we aren't concerned with the performance or usability of the
datacomputer we are building in the laboratory, we are able to build
without becoming involved with some of the most time-consuming concerns
of an implementor.  However, because we are building and tinkering,
rather than simply working on paper, we do get some of the advantages
that normally come with the experience of implementing one's ideas.

The model datacomputer is a program, developed in ECL, using the EL1
language.  Presently we are interested in the process of developing the
program, not running it.  Our primary requirement is to have, in advance
of the existence of datalanguage, a well-defined and flexible notation
in which to specify data structures, function definitions and examples.
EL1 is convenient for this.  Having a program which actually works and
acts like a simple datacomputer is really a by-product of specifying
semantics in a programming language.  It is not necessary for the
program to work, but it does provide some nice features. It enhances the
"laboratory" effect, by doing such things as automatically compiling

strings of primitives, displaying the state of the environment in
complicated examples, automatically discovering inconsistencies (in the
form of bugs), and so on.

There are two major reasons that EL1 is a convenient notation for
specifying datalanguage semantics.  One is that the languages have a
certain amount in common, in both concepts and in goals in data
description.  (In part, this is because EL1 itself has been a good
source of ideas in attacking the datalanguage problem).  Both languages
emphasize operations on data, independent of underlying representation.
A second reason that EL1 is a convenient way to specify datalanguage, is
that EL1 is extensible; in fact, many primitive functions could be
embedded directly into EL1 by using the extension facilities.  At times,
we have chosen to embed less than we could, to expose problems of
interest to us.

So far, the model has been useful primarily in exposing design issues
and relationships between design decisions.  Also, because it includes
so many of the elements of the full system (compiler, interpreter,
environment, etc.), it encourages a fairly complete analysis of any
proposal.

In presenting the model in this section, we have chosen to emphasize
ideas and examples, rather than formal definitions in EL1.  This is
because the ideas are more permanent and relevant at this point (the
formalisms are changing rather frequently) and because we imagine people
reading the formal definitions only to get at the ideas.  The formal
definitions may be interesting in themselves when the language is
complete; at this point they are probably of interest only to us.

The section is organized into a large number of sub-sections.  The first
few are concerned with the basic concepts of data objects, descriptions,
and relationships between objects.  We then discuss primitive semantic
functions and present informal definitions and examples in sections 4.7
and 4.8.  Section 4.9 is a brief discussion of compilation,
interpretation and the execution cycle.  Section 4.10 provides a fairly
elaborate example of how primitive functions can be combined to do
something of interest: a selective retrieval by content.  The last two
sections wrap up with discussions of high-level functions and some
conclusions.

4.1 Objects

An _object_ has a name, a description, and a value. It can be related to
other objects.

The _name_ is a symbol, which can be used to access the object from

language functions.

The _description_ is a specification of properties of the object, many
of which relate to the meaning or the representation of the value.

The _value_ is the information of ultimate interest in the object.

The relationships between objects are hierarchical.  Each object can be
related directly to at most four other objects, designated as its
_parent_, its _child_, its _left_sibling_, and its _right_sibling_.

This specific concept of relationship is all that has been built in to
the model to date.  One of our primary objectives in the future is to
experiment with more general relationships among objects.

4.2 Descriptions

A description has the components _name_, _type_ and _type-
dependent_parameters_.  It can be related hierarchically to other
descriptions, according to a scheme similar to the one described for
objects in 4.1.

The _name_ has a role in referencing, as in the case of objects.

_Type_ is an undefined, intuitive idea for which we expect to develop a
precise meaning within datalanguage(see section 3.10 for some of the
ideas about this).  In terms of the present model, it simply means one
of the following: LIST, STRUCT, STRING, BOOL, DESC, DIR, FUNC, 0PD.
Each of these refers to a sort of value corresponding to common ideas in
programming (with the exception of OPD, which is explained in section
4.7), and on which certain operations are defined.

Examples of _type-dependent_parameters are the two items needed to
define a STRING: size option and size.  A STRING is a sequence of
characters; the size of the STRING is the number of characters in it.
If a STRING has a fixed size, then size option is FIXED and size is the
number of characters it always contains.  If a STRING has a varying
size, then size option is VARYING, and size is its maximum (clearly, it
might also have a minimum in a more refined scheme).

When the description of an object has a type of STRING, it is commonly
said that the object is a STRING.

4.3 Values

The value is the data itself.

An object of type BOOL can have only either the value TRUE or the value
FALSE.

An object of type STRING has values such as 'ABC', 'JOHN', or 'BOSTON'.

Each value has a representation, in bits.  Thus a BOOL is represented by
a single bit, which will be a 'one' to represent TRUE and a 'zero' to
represent FALSE.

4.4 Some examples

Here are some examples of structures involving objects, descriptions,
and values.  In these explanations and drawings, the objective is to
convey some ideas about these primitive structures; considerable detail
is omitted in the drawings in the interest of clarity.

Figure 4-1 shows two objects.  X is of type string and has value 'ABC'.
Y is of type bool and has value TRUE.

                _________________
               |                 |
               |  _____________  |
               | |      X      | |
               | |_____________| |
               |  NAME           |        ____________
               |  _____________  |       |  ________  |
               | |         ____|_|______\| | STRING | |
               | |_____________| |      /| |________| |
               |  DESCRIPTION    |       |  TYPE      |
               |  _____________  |       |____________|
               | |             | |        DESCRIPTION
               | |_________|___| |
               |  VALUE    |     |        ____________
               |___________|_____|       |            |
                OBJECT     |____________\|   "ABC"    |
                                        /|____________|
                                          VALUE
                _________________
               |                 |
               |  _____________  |
               | |      Y      | |
               | |_____________| |
               |  NAME           |        ____________
               |  _____________  |       |  ________  |
               | |         ____|_|______\| |  BOOL  | |
               | |_____________| |      /| |________| |
               |  DESCRIPTION    |       |  TYPE      |
               |  _____________  |       |____________|
               | |             | |        DESCRIPTION
               | |_________|___| |
               |  VALUE    |     |        ____________
               |___________|_____|       |            |
                OBJECT     |____________\|    TRUE    |
                                        /|____________|
                                          VALUE

                               Figure 4-1
                         Two elementary objects

Figure 4-2 illustrates an object of type dir (a _directory_) and related
objects. The directory has name SMITH.  There are two objects entered in
this directory, named X and Y.

               _________________
              |  _____________  |
              | |    SMITH    | |
              | |_____________| |
              |  NAME           |        ____________
              |  _____________  |       |  ________  |
              | |         ____|_|______\| |  DIR   | |
              | |_____________| |      /| |________| |
              |  DESCRIPTION    |       |  TYPE      |
              |  _____________  |       |____________|
              | |             | |        DESCRIPTION
              | |_________|___| |
              |  CHILD    |     |
              |___________|_____|
               OBJECT     |
               ___________V_____
              |  _____________  |
              | |      X      | |
              | |_____________| |
              |  NAME           |       _________________
              |  _____________  |      |  _____________  |
         _____|_|____         | |      | |      Y      | |
        |     | |_____________| |      | |_____________| |
        |     |  DESCRIPTION    |      |  NAME           |
        |     |  _____________  |      |  _____________  |
        |   __|_|____         | |      | |         ____|_|_____
        |  |  | |_____________| |      | |_____________| |     |
        |  |  |  VALUE          |      |  DESCRIPTION    |     |
        |  |  |  _____________  |      |  _____________  |     |
        |  |  | |         ____|_|_____\| |         ____|_|__   |
        |  |  | |_____________| |     /| |_____________| |  |  |
        |  |  |  SIBLING        |      |  VALUE          |  |  |
        |  |  |_________________|      |_________________|  |  |
        |  |   OBJECT                   OBJECT              |  |
        |  |   _________________        _________________   |  |
        |  |_\|      "ABC"      |      |      FALSE      |/_|  |
        |    /|_________________|      |_________________|\    |
        |      VALUE                    VALUE                  |
        |      _________________        _________________      |
        |     |  _____________  |      |  _____________  |     |
        |     | |    STRING   | |      | |     BOOL    | |     |
        |____\| |_____________| |      | |_____________| |/____|
             /|  TYPE           |      |  TYPE           |\
              |_________________|      |_________________|
               DESCRIPTION              DESCRIPTION

                Figure 4-2: A directory with two members

The idea of a dir is similar to the idea of a file directory in most
systems.  A directory is a place where one can store named objects,
freely adding and deleting them.  The entries in the directory are all
objects whose parent is that directory.  Figure 4-3 shows a more rigidly
structured group of objects.  Here we have R, a struct, and A and B, a
pair of strings.  Note that the boxes labeled 'object' in figure 4-3
bear precisely the same relationships to one another as those labeled
'object' in 4-2.  However, there are two conditions which hold for 4-3
but do not hold for 4-2: (1) the value of R contains the values of A and
B, and (2) the descriptions of R, A and B are all related.

Structs have the following properties:  (1) name and description of each
component in the struct is established when the struct is created, and
(2) in a value of the struct, the order of occurrence of component
values is fixed.

       _________________         _________________
      |  _____________  |       |  _____________  |
      | |      R      | |       | |    STRUCT   | |
      | |_____________| |       | |_____________| |
      |  NAME           |       |  TYPE           |
      |  _____________  |       |  _____________  |
      | |         ____|_|______\| |             | |
      | |_____________| |      /| |__________|__| |
      |  DESCRIPTION    |       |  CHILD     |    |
      |  _____________  |       |____________|____|
 _____|_|____         | |        DESCRIPTION |
|     | |_____________| |        ____________V____
|     |  VALUE          |       |  _____________  |
|     |  _____________  |       | |    STRING   | |
|     | |             | |       | |_____________| |
|     | |_________|___| |   ___\|  TYPE           |        _____________
|     |  CHILD    |     |  |   /|  _____________  |       |  _________  |
|     |___________|_____|  |    | |         ____|_|______\| | STRING  | |
|      OBJECT     |        |    | |_____________| |      /| |_________| |
|                 |        |    |  SIBLING        |       |  TYPE       |
|      ___________V_____   |    |_________________|       |_____________|
|     |  _____________  |  |     DESCRIPTION           DESCRIPTION    A
|     | |      A      | |  |                                          |
|     | |_____________| |  |     _________________                    |
|     |  NAME           |  |    |  _____________  |                   |
|     |  _____________  |  |    | |      B      | |                   |
|     | |         ____|_|__|    | |_____________| |                   |
|     | |_____________| |       |  NAME           |                   |
|     |  DESCRIPTION    |       |  _____________  |                   |
|     |  _____________  |       | |         ____|_|___________________|
|   __|_|____         | |       | |_____________| |
|  |  | |_____________| |       |  DESCRIPTION    |
|  |  |  VALUE          |       |  _____________  |
|  |  |  _____________  |       | |         ____|_|____
|  |  | |         ____|_|______\| |_____________| |    |
|  |  | |_____________| |      /|  VALUE          |    |
|  |  |  SIBLING        |       |  _____________  |    |
|  |  |_________________|       | |             | |    |
|  |   OBJECT                   | |_____________| |    |
|  |                            |  SIBLING        |    |
|  |                            |_________________|    |
|  |__________                   OBJECT   _____________|
|      _______|__________________________|_______
|____\|  _____V_______            _______V_____  |
     /| |    "ABC"    |          |     FALSE   | |      Figure 4-3
      | |_____________|          |_____________| |     A STRUCT with
      |__________________________________________|      two members

Figure 4-4 shows a list named L.  Here a similar structure of objects is
implied, but because of the regularity of the structure, not all the
boxes labeled 'object' are actually present.

               _________________
              |  _____________  |
              | |      L      | |
              | |_____________| |
              |  NAME           |        ____________
              |  _____________  |       |  ________  |
              | |         ____|_|______\| |  LIST  | |
              | |_____________| |      /| |________| |
              |  DESCRIPTION    |       |  TYPE      |
              |  _____________  |       |  ________  |
              | |             | |       | |        | |
              | |_______|_____| |       | |______|_| |
              |  VALUE  |       |       |  CHILD |   |
              |_________|_______|       |________|___|
               OBJECT   |          DESCRIPTION |
                        |                      |
               _________V_______         ________V___
              |                 |       |  ________  |
              |  _____________  |       | | STRING | |
              | |    "ABC"    | |       | |________| |
              | |_____________| |       |  TYPE      |
              |  _____________  |       |____________|
              | |     "XY"    | |        DESCRIPTION
              | |_____________| |
              |  _____________  |
              | |    "ZLM"    | |
              | |_____________| |
              |        :        |
              |        :        |
              |  _____________  |
              | |    "BBBF"   | |
              | |_____________| |
              |_________________|
               VALUE

                               Figure 4-4
                                 A LIST

L has a variable number of components, all satisfying the description
subordinate to L's description.

We could imagine an 'object' box for each string in L.  Each of these
boxes would point to its respective string and to the common description
of these strings.  Instead, we think in terms of creating such boxes as
we need them.

4.5 Definitions of types

Following are some more precise definitions of types, in terms of the
present model.  These serve the purpose of establishing more firmly the
semantics of our structure of objects, descriptions and values; however,
they should not be thought of as providing a definition for the
completed language specification.

An object of type STRING has a value which is a sequence of characters
(figure 4-1).

An object of type BOOL has a value which is a truth value (TRUE or FALSE
-- figure 4-1).

An object of type DIR has subordinate objects, each having its own
description and value.  Subordinate objects can be added and deleted at
will (figure 4-2).

An object of type STRUCT has subordinate objects, each of which has a
description which is subordinate to the STRUCT's description, and a
value contained in the STRUCT's value.  The number, order and
description of components is fixed when the STRUCT is created (figure
4-3).

An object of type LIST may be thought of as having imaginary subordinate
objects, whose existence is simulated by the use of appropriate
techniques in processing the LIST.  Each of these has the same
description, which is subordinate to the description of the LIST. Each
has a distinct value, contained in the value of the LIST.  In fact, only
the LIST object, the LIST and component descriptions, and the values
exist (figure 4-4).

An object of type DESC has a description as its value.  This value is
the same sort of entity which serves as the description of other
objects.

An object of type FUNC has a function call as its value.  We will be
able to say more about this after functions have been discussed.

An object of type OPD has an operation descriptor as its value. (see 4.7
for details).

4.6 Object environment

There are three categories of objects in the model datacomputer.  These
are p/objects, t/objects, and i/objects.

P/objects are permanent objects created explicitly with language
functions.  They correspond to the idea of stored data in the real
datacomputer.  There are three special objects.  These are special only
in that they are created as part of initializing the environment, rather
than as the result of executing a language function.  These are named
STAR, BLOCK and TOP/LEVEL.  All three are of type DIR.

An object is a p/object if it is subordinate to STAR; it is a t/object
if it is subordinate to BLOCK.  TOP/LEVEL is subordinate to BLOCK. (see
figures 4-5 and 4-6).

               _________________
              |                 |
              |  _____________  |
              | |     STAR    | |
              | |_____________| |
              |  NAME           |        ____________
              |  _____________  |       |  ________  |
              | |         ____|_|______\| |  DIR   | |
              | |_____________| |      /| |________| |
              |  DESCRIPTION    |       |  TYPE      |
              |  _____________  |       |____________|
              | |             | |        DESCRIPTION
              | |_________|___| |
              |  CHILD    |     |
              |___________|_____|
               OBJECT     |
                          |
                          |
                          |
                          V

                    ALL P/OBJECTS

                               Figure 4-5
                           STAR and p/objects

T/objects are temporary objects, also created explicitly with language
functions.  However, these correspond to user-defined temporaries, both
local to requests and "top-level" (i.e. not local to any request, but
existing until deletion or logout.)

                _________________
               |                 |
               |  _____________  |
               | |    BLOCK    | |
               | |_____________| |
               |  NAME           |        ____________
               |  _____________  |       |  ________  |
               | |         ____|_|______\| |  DIR   | |
               | |_____________| |      /| |________| |
               |  DESCRIPTION    |       |  TYPE      |
               |  _____________  |       |____________|
               | |             | |        DESCRIPTION
               | |_________|___| |
               |  VALUE    |     |
               |___________|_____|
                OBJECT     |
                           |
                           |
                ___________V_____
               |                 |
               |  _____________  |
               | |  TOP/LEVEL  | |
               | |_____________| |
               |  NAME           |        ____________
               |  _____________  |       |  ________  |
               | |         ____|_|______\| |  DIR   | |
               | |_____________| |      /| |________| |
               |  DESCRIPTION    |       |  TYPE      |
               |  _____________  |       |____________|
               | |         ____|_|___     DESCRIPTION
               | |_____________| |   |
               |  SIBLING        |   |
               |  _____________  |   |___\ ALL BLOCKS AND
               | |             | |       / LOCAL T/OBJECTS
               | |_________|___| |
               |  CHILD    |     |
               |___________|_____|
                           |
                           |
                           V

                      ALL GLOBAL
                      T/OBJECTS

                               Figure 4-6
                     BLOCK, TOP/LEVEL and t/objects

I/objects are internal, system-defined objects whose creation and
deletion is implicit in the execution of some language function.

I/objects are hung directly off of function calls (objects of type
FUNC), and are always local to the execution of such function calls.
They correspond to the notions of (1) literal, and (2) compiler- or
interpreter-generated temporary.

4.7 Primitive Language Functions

Here we discuss the primitive language functions presently implemented
in the model and likely to be of most interest.  In this section, the
emphasis is on relating functions to one another. Section 4.8 contains
more detail and examples.

_Assign_ operates on a pair of objects, called the target and the
source. The value of the source is copied into the value of the target.
Figure 4-7 shows a pair of objects, X and Y, before and after execution
of an assignment having X as target and Y as source.  Presently,
assignment is defined only for objects of type BOOL and objects of type
STRING.  The objects involved must have identical descriptions.

               _________________        _________________
              |                 |      |                 |
              |  _____________  |      |  _____________  |
              | |             | |      | |             | |
              | |      X      | |      | |      Y      | |
              | |_____________| |      | |_____________| |
              |  NAME           |      |  NAME           |
              |  _____________  |      |  _____________  |
              | |             | |      | |             | |
              | |_______|_____| |      | |_______|_____| |
              |  VALUE  |       |      |  VALUE  |       |
              |_________|_______|      |_________|_______|
               OBJECT   |             OBJECT     |
                        |                        |
               _________V_______        _________V_______
              |                 |      |                 |
              |      "ABC"      |      |      "DEF"      |
              |_________________|      |_________________|
               VALUE                    VALUE

                           BEFORE ASSIGNMENT

               _________________        _________________
              |                 |      |                 |
              |  _____________  |      |  _____________  |
              | |             | |      | |             | |
              | |     X       | |      | |     Y       | |
              | |_____________| |      | |_____________| |
              |  NAME           |      |  NAME           |
              |  _____________  |      |  _____________  |
              | |             | |      | |             | |
              | |_______|_____| |      | |_______|_____| |
              |  VALUE  |       |      |  VALUE  |       |
              |_________|_______|      |_________|_______|
               OBJECT   |             OBJECT     |
                        |                        |
               _________V_______        _________V_____
              |                 |      |                 |
              |     "DEF"       |      |     "DEF"       |
              |_________________|      |_________________|
               VALUE                    VALUE

                           AFTER ASSIGNMENT

                               Figure 4-7
                          Effect of assignment

A class of primitive functions for manipulating LISTs is defined. These
are called _listops_.  All listops input a special object called an
_operation_descriptor_ or OPD.

To accomplish a complete operation on a LIST, a sequence of listops must
be executed.  There are semantic restrictions on the composition of such
sequences, and it is best to think of the entire sequence as one large
operation.  The state of such an operation is maintained in the OPD.

Refer back to figure 4-4.  There is one box labeled "object" in this
picture; this box represents the list as a whole.  To operate on any
given member we need an object box to represent that member.  Figure 4-8
shows the structure with an additional object box; the new box
represents one member at any given moment.  Its value is one of the
components of the LIST value; its description is subordinate to the LIST
description. In 4-8, the name of this object is M.

In 4-8 we have enough structure to provide a description and value for
M, and this is sufficient to permit the execution of operations on M as
an item.  However, there is no direct link between object M and object
L.  The structure is completed by the addition of an OPD, shown in
figure 4-9.

       _________________         _________________
      |                 |       |  _____________  |
      |  _____________  |       | |             | |
      | |      L      | |       | |_____________| |
      | |_____________| |       |  TYPE           |
      |  NAME           |       |  _____________  |
      |  _____________  |       | |             | |
      | |         ____|_|______\| |__________|__| |
      | |_____________| |      /|  CHILD     |    |
      |  DESCRIPTION    |       |____________|____|
      |  _____________  |        DESCRIPTION |
      | |             | |                    |
      | |_________|___| |        ____________V____
      |  VALUE    |     |       |  _____________  |
      |___________|_____|       | |    STRING   | |/___
       OBJECT     |             | |_____________| |\   |
                  |             |  TYPE           |    |
       ___________V_____        |_________________|    |
      |                 |        DESCRIPTION           |
      |  _____________  |                              |
      | |    "ABC"    | |        _________________     |
      | |_____________| |       |                 |    |
      |  _____________  |       |  _____________  |    |
      | |     "XY"    | |       | |      M      | |    |
      | |_____________| |       | |_____________| |    |
      |  _____________  |       |  NAME           |    |
      | |    "ZLM"    |/|___    |  _____________  |    |
      | |_____________|\|   |   | |         ____|_|____|
      |        :        |   |   | |_____________| |
      |        :        |   |   |  DESCRIPTION    |
      |  _____________  |   |   |  _____________  |
      | |    "BBBF"   | |   |___|_|____         | |
      | |_____________| |       | |_____________| |
      |_________________|       |  VALUE          |
       VALUE                    |_________________|
                                 OBJECT

                               Figure 4-8
                        LIST and member objects

       _________________         _________________
      |  _____________  |       |  _____________  |
      | |      L      | |       | |             | |
      | |_____________| |       | |_____________| |
      |  NAME           |       |  TYPE           |
      |  _____________  |       |  _____________  |
      | |         ____|_|______\| |             | |
      | |_____________| |      /| |__________|__| |
      |  DESCRIPTION    |       |  CHILD     |    |
      |  _____________  |       |____________|____|
      | |             | |/__     DESCRIPTION |
      | |_________|___| |\  |    ____________V____
      |  VALUE    |     |   |   |  _____________  |
      |___________|_____|   |   | |    STRING   | |/___
       OBJECT     |         |   | |_____________| |\   |
                  |         |   |  TYPE           |    |
       ___________V_____    |   |_________________|    |
      |  _____________  |   |    DESCRIPTION           |
      | |    "ABC"    | |   |    _________________     |
      | |_____________| |   |   |                 |    |
      |  _____________  |   |   |  _____________  |    |
      | |     "XY"    | |   |___|_|____         | |    |
      | |_____________| |       | |_____________| |    |
      |  _____________  |       |  LIST           |    |
      | |    "ZLM"    | |       |  _____________  |    |
      | |_____________| |       | |             | |    |
      |        :        |       | |_________|___| |    |
      |        :        |       |  MEMBER   |     |    |
      |  _____________  |       |     :     |     |    |
      | |    "BBBF"   |/|___    |     :     |     |    |
      | |_____________|\|   |   |___________|_____|    |
      |_________________|   |    OPD        |          |
       VALUE                |    ___________V_____     |
                            |   |  _____________  |    |
                            |   | |      M      | |    |
                            |   | |_____________| |    |
                            |   |  NAME           |    |
                            |   |  _____________  |    |
                            |   | |         ____|_|____|
                            |   | |_____________| |
                            |   |  DESCRIPTION    |
                            |   |  _____________  |
                            |___|_|____         | |
                                | |_____________| |
         Figure 4-9             |  VALUE          |
    OPD, LIST and member        |_________________|
                                 OBJECT

The OPD establishes the object relationship, and contains information
about the sequence of primitive listops in progress.  When sufficient
information is maintained in the OPD, we have in 4-9 a structure which
is adequate for the maintenance of the integrity of the LIST and of the
global list operation.  In addition to LIST and member pointers, the OPD
contains information indicating: (1) which suboperations are enabled for
the sequence, (2) the current suboperation, (3) the instance number of
the current LIST member, (4) an end-of-list indicator.  The
suboperations are add/member, delete/member, change/member and
get/member.  All apply to the current member.  Only suboperations which
have been enabled at the beginning of a sequence may be executed during
that sequence; eventually, the advance knowledge of intentions that is
implied by this will provide important information for concurrency
control and optimization.

Presently, an OPD relates a single member object to a single LIST
object.  This imposes an important restriction on the class of operation
sequences which can be expressed.  Any LIST transformation requiring
simultaneous access to more than one member must be represented as more
than one sequence. (And we do not yet solve the problems implied in
concurrent execution of such sequences, even when both are controlled by
one process.)

Any transformation of a LIST can still be achieved by storing
intermediate results in temporary objects; however, it is certainly more
desirable to incorporate the idea of multiple current members into the
semantics of the language, than it is to use such temporaries.  An
important future extension of the listops will deal with this problem.

There are six listops: listop/begin, listop/end, which/member,
end/of/list, open/member and close/member.

Listop/begin and listop/end perform the obvious functions of beginning
and terminating a sequence of listops.  Listop/begin inputs LIST and
member objects, an OPD, and a specification of suboperations to enable.
It initializes the OPD, including establishment of the links to LIST and
MEMBER objects.  After the OPD-LIST-member relationship has been
established, it is only necessary to supply the OPD and auxiliary
parameters as input to a listop in the sequence. From the OPD everything
else can be derived.

Listop/end clears the OPD and frees any resources acquired by
listop/begin.

Which/member establishes the current member for any suboperations.  This
is either the first LIST member, the last LIST member, or the next LIST
member.  This listop merely identifies which member is to be operated
on; it does not make the contents of the member accessible.

Open/member and close/member bracket a suboperation.  The suboperation
is indicated as an argument to open/member.  Open/member always
establishes a pointer from the member object to the member value;
close/member always clears this pointer.  In addition, each of these
listops may take some action, depending on the suboperation.

The details of the action would be dependent on the representation of
the LIST in storage, the size of a LIST member, and choices made in
implementation.

Between execution of the open/member and the close/member, the data is
accessible.  It can always be read; in the case of the add/member and
change/member suboperations, it can also be written into.

End/of/list tests a flag in the OPD and returns an object of type BOOL.
The value of the object is the same as the value of the flag; it is TRUE
if a get/member, change/member or delete/member would be unsuccessful
due to a which/member having moved "beyond the end". T his listop is
provided so that it is possible to write procedures which terminate
conditionally when all members have been processed.

Get/struct/member provides the ability to handle STRUCTs.  Given a
STRUCT object which points to the STRUCT value, it will establish a
pointer from a given member object to the member value.  (The pointer it
establishes is represented by a dashed line in figure 4-10).

 _________________         _________________
|  _____________  |       |  _____________  |
| |      F      | |       | |   STRUCT    | |
| |_____________| |       | |_____________| |
|  NAME           |       |  TYPE           |
|  _____________  |       |  _____________  |
| |         ____|_|______\| |             | |
| |_____________| |      /| |__________|__| |
|  DESCRIPTION    |       |  CHILD     |    |
|  _____________  |       |____________|____|
| |             | |        DESCRIPTION |
| |___________|_| |        ____________V____         _________________
|  VALUE      |   |       |  _____________  |       |  _____________  |
|  ___________|_  |       | |    STRING   | |       | |    STRING   | |
| |           | | |       | |_____________| |       | |_____________| |
| |_________|_|_| |       |  TYPE           |       |  TYPE           |
|  CHILD    | |   |       |  _____________  |       |  _____________  |
|___________|_|___|  ____\| |             | |       | |             | |
 OBJECT     | |     |    /| |_____________| |       | |_____________| |
            | |     |     |  SIBLING        |       |  SIBLING        |
            | |     |     |_________________|       |_________________|
            | |     |      DESCRIPTION               DESCRIPTION    A
            | |     |      ______________________________________   |
            | |     |     |  ____________          ____________  |  |
            | |     |     | |    "ABC"   |        |    FALSE   | |  |
            | |_____|_____| |____________|        |____________| |  |
            |       |     |________A_____________________________|  |
            |       |  ............:                        VALUE   |
 ___________V_____  |  :   _________________                        |
|  _____________  | |  :  |  _____________  |                       |
| |      A      | | |  :  | |      B      | |                       |
| |_____________| | |  :  | |_____________| |                       |
|  NAME           | |  :  |  NAME           |                       |
|  _____________  | |  :  |  _____________  |                       |
| |         ____|_|_|  :  | |         ____|_|_______________________|
| |_____________| |    :  | |_____________| |
|  DESCRIPTION    |    :  |  DESCRIPTION    |
|  _____________  |    :  |  _____________  |
| |         ....|.|....:  | |             | |
| |_____________| |       | |_____________| |
|  VALUE          |       |  VALUE          |
|  _____________  |       |  _____________  |
| |         ____|_|______\| |             | |
| |_____________| |      /| |_____________| |
|  SIBLING        |       |  SIBLING        |
|_________________|       |_________________|        Figure 4-10
 OBJECT                    OBJECT            Effect of GET/STRUCT/MEMBER

The primitives discussed so far (assign, listops, and get/struct/member)
provide a basic facility for operating on structures of LISTs, STRUCTs
and elementary items.  Using only them, it is possible to transfer the
contents of one hierarchical structure to another, to append structures,
to delete portions of structures, and so on.  To perform more
interesting operations facilities for control and selection are needed.

A rudimentary control facility is provided through the primitives
if/then, if/then/else, till and while.  All of these evaluate one
primitive function call, which must return a BOOL.  Based on the value
of this BOOL some action is taken.

Let A and B be function calls.  If/then(A,B) will execute B if A returns
TRUE.  If/then/else(A,B,C) will execute B if A returns TRUE; it will
execute C if A returns FALSE.  The while and till operators iterate,
executing first A then B. While terminates the loop when A returns
FALSE; till terminates the loop when A returns TRUE.  If this happens
the first time, B is never executed.

So far, we have mentioned one function which returns a BOOL: the listop,
end/of/list.  Two other classes of functions which have this property
are the booleans and the comparisons.  There are 3 primitive booleans
(and, or, not) and six primitive comparisons (equal, less/than,
greater/than, not/equal, less/than/or/equal, greater/than/or/equal --
only equal is implemented at time of publication).

The booleans input and output BOOLs; the comparisons input pairs of
elementary objects having the same description and output BOOLs.
Expressions composed of booleans and comparisons on item contents are
one of the principal tools used in selectively referencing data in data
management systems.

With the booleans, the comparisons, and the primitives identified
earlier, we can perform selective "retrievals".  That is, we can
transfer to LIST B all items in LIST A having a value of 'ABC'.  In
fact, we now have a (semantically) general ability to perform content-
based retrievals and updates on arbitrary hierarchical structures.  We
can even program something as complex as the processing of a list of
transactions against a master list, which is one of the typical
applications in business data processing.

Of course, we would not expect users of datalanguage to express requests
at the level of listops.  Further, the listops defined here are not a
very efficient way of performing some of the tasks we have mentioned.
To get good solutions, we need both higher-level operators and other
primitives which use other techniques in processing.

In addition to those already discussed, the model contains functions

for: (1) referencing an object by qualified name, (2) generating a
constant, (3) generating data descriptions, (4) writing compound
functions and blocks with local variables, (5) creating objects.

The facilities for generating constants and data descriptions (which are
a special case of constants) are marginal, and have no features of
special interest. Obviously, data description will be an important
concern in the modeling effort later on.

Object referencing functions permit reference to t/objects and p/objects
(these terms are defined in 4.6).  A p/object is referenced by giving
the pathname from STAR to it.  A t/object is referenced by giving the
pathname from the block directory in which it is defined to it.

Compound/function permits a sequence of function calls to be treated
syntactically as a single call.  Thus, for example, in if/then(A,B), B
is frequently a call to compound/function, which in turn calls a
sequence of other functions.

Create takes two inputs: a superior object and a description.  The
superior must be a directory.  The new object is created as the leftmost
child of the directory; its name is determined by the description.

4.8 Details of primitive language functions

This section provides specifications for the primitives discussed in the
previous section.  We are still omitting details when we judge them to
be of no general interest; the objective is to provide enough
information for the reader to examine examples.

Most of the primitives occur at two levels in the model.  The internal
primitives are called i/functions and the external, or language
primitives are called l/functions.  The relationship between the two
types are explained in 4.9. In this section we discuss i/functions.

L/functions input and output _forms_, which are tree structures whose
terminal nodes are atoms.  The atoms are such things as function names,
object names, literal string constants, truth va1ues and delimiters.
Calls to i/functions are also expressed as forms.

Any form can be evaluated, yielding some object.  A form which is an
i/function call yields the value returned by the i/function: another
form.  In general, the form returned by an i/function call will, when
evaluated, yield a datalanguage object (that is, the sort of object we
have been represented by an "object box" in the drawings).

4.8.1 Name recognition functions

These return a form which evaluates to an object.

L/TOBJ

Input must name a temporary object subordinate either to TOP/LEVEL or a
block directory.

L/POBJ

Input must name a permanent object (i.e., an object subordinate to
STAR).

Typical calls are L/POBJ(X.Y.Z) and L/TOBJ(A).

4.8.2 Constant generators

Each of these inputs an atomic symbol yielding a value for a constant to
be created.  Each returns a form which will evaluate to an object having
the specified value and an appropriate description.

LC/STRING - a typical call is LC/STRING('ABC')

LC/BOOL - a typical call is LC/BOOL(TRUE)

4.8.3 Elementary item functions

These input and output forms evaluating to elementary objects (objects
which can have no subordinate object -- in effect, objects whose value
is regarded as atomic).  Eventually all the comparison operators will be
implemented.

L/ASSIGN

Inputs must evaluate either to STRINGs or BOOLs. Outputs a form which
transfers the value of the second to the first.  Typical call:
    L/ASSIGN(L/TOBJ(A),LC/STRING('XYZ'))
The output form, when evaluated, will copy 'XYZ' into A's value.

L/EQUAL

Inputs a pair of forms evaluating to objects, which must have identical
descriptions and be BOOLs or STRINGs.  Returns a form evaluating to an
object of type BOOL.  Value of this object is TRUE if inputs have
identical descriptions and values; otherwise it is false. Typical call:

    L/EQUAL(L/TOBJ(X),LC/STRING('DEF'))

L/AND, L/OR, L/NOT

The standard boolean operators.  Inputs are forms evaluating to BOOLs;
output is a form evaluating to a BOOL.  L/AND and L/OR take two inputs;
L/NOT one.  Typical call:
    L/AND( L/EQUAL(L/TOBJ(X),LC/STRING('DEF')),
                   L/EQUAL(T/TOBJ(Y),LC/STRING('GHI')) )
The form returned will, when evaluated, return TRUE if both X has value
'DEF' and Y has value 'GHI'.

4.8.4 Data description functions

These all return a form evaluating to a description (i.e. that which is
represented in our drawings by a box labeled "description").

LD/STRING

Inputs 3 parameters specifying the name, size option and size for the
string. Typical call:
    LD/STRING(X,FIXED,3)
This call returns a form evaluating to a description for a fixed-length
3-character string named X.

LD/LIST

Inputs two forms.  The first is the name of the LIST and the second
evaluates to a description of the LIST member.  Typical call:
    LD/LIST(L,LD/STRING(M,FIXED,3))
Creates the structure shown in figure 4-11, and returns a form
evaluating to the description represented by the upper box.

               _________________
              |  _____________  |
              | |      L      | |
              | |_____________| |
              |  NAME           |
              |  _____________  |
              | |     LIST    | |
              | |_____________| |
              |  TYPE           |
              |  _____________  |
              | |             | |
              | |________|____| |
              |  CHILD   |      |
              |__________|______|
             DESCRIPTION |
                         |
               __________V______
              |  _____________  |
              | |      M      | |
              | |_____________| |
              |  NAME           |
              |  _____________  |
              | |    STRING   | |
              | |_____________| |
              |  TYPE           |
              |  _____________  |
              | |  _________  | |
              | | |  FIXED  | | |
              | | |_________| | |
              | |  _________  | |
              | | |    3    | | |
              | | |_________| | |
              | |_____________| |
              |  PARAMETERS     |
              |_________________|
               DESCRIPTION

                              Figure 4-11
                      LIST and member descriptions

LD/STRUCT

Inputs a form to use as the name for the STRUCT and one or more forms
evaluating to descriptions; these are taken as the descriptions of the
members.  Typical call:

    LD/STRUCT(R,
            LD/STRING(A,FIXED,3)
            LD/BOOL(B) )
produces the structure shown in 4-12; returns a form evaluating to the
top box.

               _________________
              |  _____________  |
              | |      R      | |
              | |_____________| |
              |  NAME           |
              |  _____________  |
              | |    STRUCT   | |
              | |_____________| |
              |  TYPE           |
              |  _____________  |
              | |             | |
              | |_________|___| |
              |  CHILD    |     |
              |___________|_____|
             DESCRIPTION  |
                          |
               ___________V_____
              |  _____________  |
              | |      A      | |
              | |_____________| |
              |  NAME           |
              |  _____________  |
              | |    STRING   | |
              | |_____________| |
              |  TYPE           |        _________________
              |  _____________  |       |  _____________  |
              | |             | |       | |      B      | |
              | |_____________| |       | |_____________| |
              |  PARAMETER      |       |  NAME           |
              |  _____________  |       |  _____________  |
              | |         ____|_|______\| |    BOOL     | |
              | |_____________| |      /| |_____________| |
              |  SIBLING        |       |  TYPE           |
              |_________________|       |_________________|
               DESCRIPTION               DESCRIPTION

                              Figure 4-12
                     STRUCT and member descriptions

LD/BOOL, LB/DIR, LD/OPD, LD/FUNC, LD/DESC

Each inputs a name and produces a single description; each returns a
form evaluating to the description produced.  Typical call:
    LD/BOOL(X)

4.8.5 Data creation

L/CREATE

Inputs two forms and evaluates them.  First must yield an object of type
DIR; second must yield a description for the object to be created.
Creates the object and returns a form, which, when evaluated, will
generate a value for the new object.  A simple example:
    L/CREATE(L/TOBJ(X),LD/B0OL(Y))

Figure 4-13 shows the directory X before execution of the above call. It
contains only an OPD.  After execution, the directory appears as in 4-
14. Creation of a value for Y occurs when the form returned by L/CREATE
is evaluated (covered in section 4.9).

                _________________
               |                 |
               |  _____________  |
               | |      X      | |
               | |_____________| |
               |  NAME           |        ____________
               |  _____________  |       |  ________  |
               | |         ____|_|______\| |   DIR  | |
               | |_____________| |      /| |________| |
               |  DESCRIPTION    |       |  TYPE      |
               |  _____________  |       |____________|
               | |             | |        DESCRIPTION
               | |_________|___| |
               |  CHILD    |     |
               |___________|_____|
                OBJECT     |
                           |
                           |
                ___________V_____
               |                 |
               |  _____________  |
               | |      Z      | |
               | |_____________| |
               |  NAME           |        ____________
               |  _____________  |       |  ________  |
               | |         ____|_|______\| |  OPD   | |
               | |_____________| |      /| |________| |
               |  DESCRIPTION    |       |  TYPE      |
               |  _____________  |       |____________|
               | |             | |        DESCRIPTION
               | |_________|___| |
               |  VALUE    |     |        ____________
               |___________|_____|       |            |
                OBJECT     |____________\|            |
                                        /|____________|
                                          OPD

                              Figure 4-13
                      X and Z before creation of Y

 _________________
|  _____________  |
| |      X      | |
| |_____________| |        _________________
|  NAME           |       |  _____________  |
|  _____________  |       | |     DIR     | |
| |         ____|_|______\| |_____________| |
| |_____________| |      /|  TYPE           |
|  DESCRIPTION    |       |_________________|
|  _____________  |        DESCRIPTION
| |             | |
| |_________|___| |
|  VALUE    |     |
|___________|_____|
 OBJECT     |
 ___________V_____
|  _____________  |
| |      Y      | |
| |_____________| |        _________________
|  NAME           |       |  _____________  |
|  _____________  |       | |     BOOL    | |
| |         ____|_|______\| |_____________| |
| |_____________| |      /|  TYPE           |
|  DESCRIPTION    |       |_________________|
|  _____________  |        DESCRIPTION
| |             | |
| |_____________| |
|  VALUE          |
|  _____________  |
| |         ____|_|______________
| |_____________| |              |
|  SIBLING        |              |
|_________________|        ______V__________         _________________
       OBJECT             |  _____________  |       |  _____________  |
                          | |      Z      | |       | |     OPD     | |
                          | |_____________| |    __\| |_____________| |
                          |  NAME           |   |  /|  TYPE           |
                          |  _____________  |   |   |_________________|
                          | |         ____|_|___|    DESCRIPTION
                          | |_____________| |
                          |  DESCRIPTION    |
                          |  _____________  |        _________________
                          | |         ____|_|______\|                 |
       Figure 4-14        | |_____________| |      /|_________________|
    X, Y, and Z after     |  VALUE          |        OPD
        L/CREATE          |_________________|
                           OBJECT

4.8.6 Control

L/IF/THEN, L/IF/THEN/ELSE

Used to request conditional evaluation of a form. Typical call:
    L/IF/THEN(L/EQUAL(L/TOBJ(A),LC/STRING('ABC'),
            L/ASSIGN(L/TOBJ(B),LC/STRING('DE')))
The form returned will do the following, when evaluated: if A has value
'ABC', then store 'DE' in the value of B.

L/WHILE, L/TILL

These iterate conditionally, as explained in the previous section.
Examples appear later.

L/CF

Compound function: it inputs one or more forms and returns a form which,
when evaluated, will evaluate each input in sequence.  Typical call:
    L/CF(L/ASSIGN(L/TOBJ(R.A),LC/STRING('XX')),
            L/ASSIGN(L/TOBJ(R.B),LC/STRING('YY')))
When the output of L/CF is evaluated, it will assign new values to R.A
and R.B.

4.8.7 Listops

These primitives are executed in sequences in order to perform
operations on LISTs.  With the exception of L/END/OF/LIST these
functions output forms which are evaluated for effect only; that is, the
output forms do not themselves return values.

L/LISTOP/BEGIN

Inputs forms evaluating to: (1) a LIST, (2) an object to represent the
current LIST member, (3) an OPD.  Also, inputs a list of atomic forms
whose values are taken as suboperations to enable. Typical call:
    L/LISTOP/BEGIN(L/POBJ(F),L/TOBJ(R),
                    L/TOBJ(OPF),ADD,DELETE)
This returns a form that will initialize a sequence of listops to be
performed on F.  Caller has previously created R and OPF. He intends to
ADD and DELETE list members.

All subsequent calls in this sequence of listops need specify only the
OPD and auxiliary parameters.

L/LISTOP/END

Inputs a form evaluating to an OPD.  Outputs a form which, when
evaluated, clears OPD and breaks relationships between OPD, LIST and
member objects.

L/WHICH/MEMBER

Inputs two forms.  First evaluates to an OPD; second is one of FIRST,
LAST, NEXT. The form output, when evaluated, will establish a new
current member for the next suboperation.  Note: this does not make the
value of the member accessible, it simply identifies it by setting the
instance number in the OPD.  A typical call:
    L/WHICH/MEMBER(L/TOBJ(OPF),NEXT)
When a which/member causes advance beyond the end of the list, a flag is
set in the OPD.

L/END/OF/LIST

Inputs a form evaluating to an OPD.  Outputs a form which, when
evaluated, returns a BOOL.  This has value TRUE if the end of list flag
in the OPD is on.

L/OPEN/MEMBER

Inputs a form evaluating to an OPD and a form which must be one of ADD,
DELETE, GET, CHANGE.  Outputs a form which, when evaluated, will
initiate the requested suboperation on the current LIST member.  The
suboperation always establishes the pointer from the member object to
the current member value instance.  In addition, in the case of ADD this
value must be created.  Typical call:
    L/OPEN/MEMBER (L/TOBJ (OPF) ,ADD)

L/CLOSE/MEMBER

Inputs a form evaluating to an OPD.  Outputs a form which, when
evaluated, will complete the suboperation in progress.  A typical call:
    L/CLOSE/MEMBER(L/TOBJ(OPF))
Always clears the pointer from member object to member value.  In
addition, in the case of DELETE, removes the member value from the LIST.
In the case of ADD enters the member value in the LIST.  Makes the
member added the current member, so that a sequence of ADDs executed
without intervening which/members will add the new members in sequence.

An elaborate example, involving listops and several other primitives,
appears in section 4.10.

4.9 Execution cycle

The model datacomputer has a two-part execution cycle: it first compiles
requests, then interprets them.  A "request" is an l/function call;
"compilation" is the aggregate result of executing all the l/function
calls involved in the request (typically this is many calls, as there
are usually several levels of nested calls, with the results of the
inner calls being delivered as arguments to the next level of calls).
Usually, the process of executing an l/function involves a simple macro
expansion, preceded by some binding, checking and (eventually)
optimization.

The compiled form consists wholly of atomic symbols and i/function
calls.  The i/functions are internal primitives which input and output
datalanguage objects (the entities represented by the boxes labeled
"object" in the drawings).

Each of the l/functions discussed compiles into a single i/function;
thus the macro expansion aspect of compilation is presently trivial.
However, this will not be true in general; it is only that these are
_primitive_ l/functions that makes it true now.

The decision to use a compile-and-interpret cycle calls for some
explanation.  The way to understand this, is to think in terms of the
functions that would be performed in a strictly interpretive system.
There would still be a requirement to perform global checks on the
validity of the request in advance of the execution of any part of it.
This is because partial execution of an incorrect request can leave a
database in an inconsistent state; if this is a large or complex
database, the cost of recovery will be considerable.  Thus it pays to do
as much checking as is possible; when the system is fully developed,
this will include a certain element of simple prediction of execution
flow; in any case, much more than syntactic checking is implied.

Since any such global checks will be performed in advance of actual
execution, they are effectively not part of the execution itself, for
any given form.  By performing them as part of a separate compilation
process, we only formalize a modularity which already effectively
exists.

There will still be cases, however, in which checking, binding and
optimization functions must be executed during interpretation, if at
all.  This will occur when the information needed is not available until
some of the data has been accessed. When practical, we will provide for
such occurrences by designing most functions so that they can be
executed as part of either "half" of the cycle.

As the model develops, we expect to get a better feel for this problem;

it is certainly reasonable to end up with a structure in which there are
many cycles of compilation and interpretation, perhaps forming a
structure in which nesting of cycles within cycles occurs.

4.10 Examples of operations on LISTs

Here we develop an example of an operation on a LIST using primitive
l/functions.  We first show the function calls required to create a LIST
named F and give it a few member values.  We then selectively copy
certain members to a second LIST G.

To create F:

L/CREATE("STAR",LD/LIST(F,
                        LD/STRUCT(R,
                                LD/STRING(A,FIXED,2),
                                LD/STRING(B,FIXED,2))))

This creates F as a member of the permanent directory STAR (see section
4.6 for details about STAR).  The symbol STAR has a special status in
the "language", in that it is one of the few atomic symbols to evaluate
directly to an object.  (Recall that most permanent objects are
referenced through a call to L/POBJ; reserving the symbol STAR is
equivalent to reserving STAR as a name and writing L/POBJ(STAR).  The
solution we choose here is easier to write.)  Execution of this call
builds the structure shown in 4-15 (except for STAR, which existed in
advance of the call).  The value initially created for F is an empty
LIST--a LIST of zero members.

 _________________         _________________
|  _____________  |       |  _____________  |
| |     STAR    | |       | |      F      | |
| |_____________| |       | |_____________| |
|  NAME           |       |  NAME           |
|  _____________  |       |  _____________  |
| |             | |       | |     LIST    | |
| |_________|___| |       | |_____________| |
|  CHILD    |     |       |  TYPE           |
|___________|_____|       |  _____________  |
 OBJECT     |             | |             | |
            |             | |___________|_| |
 ___________V_____     __\|  CHILD      |   |
|  _____________  |   |  /|_____________|___|
| |      F      | |   |    DESCRIPTION  |
| |_____________| |   |                 |
|  NAME           |   |    _____________V___
|  _____________  |   |   |  _____________  |
| |         ____|_|   |   | |      R      | |
| |_____________| |___|   | |_____________| |
|  DESCRIPTION    |       |  NAME           |
|  _____________  |       |  _____________  |
| |             | |       | |    STRUCT   | |
| |_________|___| |       | |_____________| |
|  VALUE    |     |       |  TYPE           |
|___________|_____|       |  _____________  |
 OBJECT     |             | |             | |
            |             | |___________|_| |
 ___________V_____        |  CHILD      |   |
|                 |       |_____________|___|
|                 |        DESCRIPTION  |
|_________________|        _____________V___
 VALUE                    |  _____________  |
                          | |      A      | |
                          | |_____________| |
                          |  NAME           |       _________________
                          |  _____________  |      |  _____________  |
                          | |    STRING   | |      | |      B      | |
                          | |_____________| |      | |_____________| |
                          |  TYPE           |      |  NAME           |
                          |  _____________  |      |  _____________  |
                          | |         ____|_|_____\| |  STRING     | |
       Figure 4-15        | |_____________| |     /| |_____________| |
   F immediately after    |  SIBLING        |      |  TYPE           |
        creation          |_________________|      |_________________|
                           DESCRIPTION              DESCRIPTION

To add members to F, we need to use listops, and for this we must create
two more objects: an object to represent the current member and an
operation descriptor (OPD).  These are temporaries rather than permanent
objects; they are also "top level" (i.e., not local to a request).
Temporary, top level objects are created as members of the directory
TOP/LEVEL. The calls to create them are:
    L/CREATE(L/TOBJ(TOP/LEVEL),
                    LD/STRUCT(M,
                            LD/STRING(A,FIXED,2),
                            LD/STRING(B,FIXED,2)))
    L/CREATE(L/TOBJ(TOP/LEVEL),LD/OPD(OPF))
We create M to represent the current member; its description is the same
as the one input for a member of F (see the call which created F). The
proper way to accomplish this is with a mechanism which shares the
actual LIST member description with M; however, this mechanism does not
yet exist in our model.

We now wish to add some data to F; each member will be a STRUCT
containing two two-character STRINGs.

To begin the listop sequence:
    L/LISTOP/BEGIN(L/POBJ(F),L/TOBJ(M),
                            L/TOBJ(OPF),ADD)
This call establishes the structure shown in figure 4-16. It initializes
the OPD, making it point to F and M and recording that only the ADD
suboperation is enabled.

 _________________         _________________
|  _____________  |       |  _____________  |
| |     STAR    | |       | |     OPF     | |
| |_____________| |       | |_____________| |
|  NAME           |       |  NAME           |
|  _____________  |       |  _____________  |
| |             | |       | |             | |
| |_________|___| |       | |_______|_____| |
|  CHILD    |     |       |  VALUE  |       |
|___________|_____|       |_________|_______|
 OBJECT     |              OBJECT   |
 ___________V_____         _________V______
|  _____________  |       |  _____________  |
| |      F      | |/______|_|____         | |
| |_____________| |\      | |_____________| |
|  NAME           |       |  LIST           |
|  _____________  |       |  _____________  |
| |             | |       | |             | |
| |_________|___| |       | |________|____| |
|  VALUE    |     |       |  MEMBER  |      |
|___________|_____|       |__________|______|
 OBJECT     |              VALUE     | OPD
            |              __________V______
 ___________V_____        |  _____________  |
|                 |       | |      M      | |
|       LIS       |       | |_____________| |
|_________________|       |  NAME           |
 VALUE                    |  _____________  |
                          | |             | |
                          | |________|____| |
                          |  CHILD   |      |
                          |__________|______|
                           OBJECT    |
                           __________V______        _________________
                          |  _____________  |      |  _____________  |
                          | |      A      | |      | |      B      | |
                          | |_____________| |      | |_____________| |
                          |  NAME           |      |  NAME           |
                          |  _____________  |      |  _____________  |
                          | |         ____|_|_____\| |             | |
                          | |_____________| |     /| |_____________| |
                          |  SIBLING        |      |                 |
                          |_________________|      |_________________|
                           OBJECT                   OBJECT

                              Figure 4-16
                   F, OPF and M after L/BEGIN/LISTOP

Next we must establish a current member.  We want to add members to the
end (in this case, adding them anywhere would get the same effect, since
the LIST is empty), which is done by making LAST the current member.
    L/WHICH/MEMBER(L/TOBJ(OP1),LAST)

Now, to add a new member to F, we can execute the following:
    L/OPEN/MEMBER(L/TOBJ(OPF),ADD)
    L/ASSIGN(L/TOBJ(M.A),LC/STRING('AB'))
    L/ASSIGN(L/TOBJ(M.B),LC/STRING('CD'))
    L/CLOSE/MEMBER(L/TOBJ(OPF))

L/OPEN/MEMBER creates a STRUCT value for M.  It does not affect the
value of F.  Each member of the STRUCT value is initialized when the
STRUCT is created.  The result is shown in 4-17; notice that the STRUCT
member values are as yet unrelated to the objects M.A and M.B.

Figure 4-18 shows the changes accomplished by the first L/ASSIGN; the
pointer from the object M.A to the value was set up by a
GET/STRUCT/MEMBER compiled by L/TOBJ(M.A).  The value was filled in by
the assign operator.  The second assign has similar effect, filling in
the second value.  The call to L/CLOSE/MEMBER takes the value shown for
M in 4-18 (with the second member value filled in) and adds it to the
value of F.  The result is shown in 4-19; compare with 4-16.

       _________________         _________________
      |  _____________  |       |  _____________  |
      | |      M      | |       | |    STRUC    | |
      | |_____________| |       | |_____________| |
      |  NAME           |       |  TYPE           |
      |  _____________  |       |  _____________  |
      | |         ____|_|______\| |             | |
      | |_____________| |      /| |__________|__| |
      |  DESCRIPTION    |       |  CHILD     |    |
      |  _____________  |       |____________|____|
 _____|_|____         | |        DESCRIPTION |
|     | |_____________| |                    |
|     |  VALUE          |        ____________V____
|     |  _____________  |       |  _____________  |
|     | |             | |       | |    STRING   | |
|     | |_________|___| |       | |_____________| |
|     |  CHILD    |     |   ___\|  TYPE           |        _____________
|     |___________|_____|  |   /|  _____________  |       |  _________  |
|      OBJECT     |        |    | |         ____|_|______\| | STRING  | |
|                 |        |    | |_____________| |      /| |_________| |
|      ___________V_____   |    |  SIBLING        |       |  TYPE       |
|     |  _____________  |  |    |_________________|       |_____________|
|     | |      A      | |  |     DESCRIPTION           DESCRIPTION    A
|     | |_____________| |  |                                          |
|     |  NAME           |  |     _________________                    |
|     |  _____________  |  |    |  _____________  |                   |
|     | |         ____|_|__|    | |      B      | |                   |
|     | |_____________| |       | |_____________| |                   |
|     |  DESCRIPTION    |       |  NAME           |                   |
|     |  _____________  |       |  _____________  |                   |
|     | |             | |       | |         ____|_|___________________|
|     | |_____________| |       | |_____________| |
|     |  VALUE          |       |  DESCRIPTION    |
|     |  _____________  |       |  _____________  |
|     | |         ____|_|______\| |             | |
|     | |_____________| |      /| |_____________| |
|     |  SIBLING        |       |  VALUE          |
|     |_________________|       |_________________|
|      OBJECT                    OBJECT
|___________________________
                            |
       _____________________V____________________
      |  _____________            _____________  |
      | |             |          |             | |
      | |_____________|          |_____________| |
      |__________________________________________|       Figure 4-17
       VALUE                                         After L/OPEN/MEMBER

       _________________         _________________
      |  _____________  |       |  _____________  |
      | |      M      | |       | |    STRUC    | |
      | |_____________| |       | |_____________| |
      |  NAME           |       |  TYPE           |
      |  _____________  |       |  _____________  |
      | |         ____|_|______\| |             | |
      | |_____________| |      /| |__________|__| |
      |  DESCRIPTION    |       |  CHILD     |    |
      |  _____________  |       |____________|____|
 _____|_|____         | |        DESCRIPTION |
|     | |_____________| |                    |
|     |  VALUE          |        ____________V____
|     |  _____________  |       |  _____________  |
|     | |             | |       | |    STRING   | |
|     | |_________|___| |       | |_____________| |
|     |  CHILD    |     |   ___\|  TYPE           |        _____________
|     |___________|_____|  |   /|  _____________  |       |  _________  |
|      OBJECT     |        |    | |         ____|_|______\| | STRING  | |
|                 |        |    | |_____________| |      /| |_________| |
|      ___________V_____   |    |  SIBLING        |       |  TYPE       |
|     |  _____________  |  |    |_________________|       |_____________|
|     | |      A      | |  |     DESCRIPTION           DESCRIPTION    A
|     | |_____________| |  |                                          |
|     |  NAME           |  |     _________________                    |
|     |  _____________  |  |    |  _____________  |                   |
|     | |         ____|_|__|    | |      B      | |                   |
|     | |_____________| |       | |_____________| |                   |
|     |  DESCRIPTION    |       |  NAME           |                   |
|     |  _____________  |       |  _____________  |                   |
|   __|_|____         | |       | |         ____|_|___________________|
|  |  | |_____________| |       | |_____________| |
|  |  |  VALUE          |       |  DESCRIPTION    |
|  |  |  _____________  |       |  _____________  |
|  |  | |         ____|_|______\| |             | |
|  |  | |_____________| |      /| |_____________| |
|  |  |  SIBLING        |       |  VALUE          |
|  |  |_________________|       |_________________|
|  |  OBJECT                    OBJECT
|  |___________
|              |
|      ________|_________________________________
|     |  ______V______            _____________  |
|____\| |   "AB"      |          |             | |
     /| |_____________|          |_____________| |
      |__________________________________________|       Figure 4-18
       VALUE                                        After first L/ASSIGN

    _________________         _________________
   |  _____________  |       |  _____________  |
   | |     STAR    | |       | |     OPF     | |
   | |_____________| |       | |_____________| |
   |  NAME           |       |  NAME           |
   |  _____________  |       |  _____________  |
   | |             | |       | |             | |
   | |_________|___| |       | |___________|_| |
   |  CHILD    |     |       |  VALUE      |   |
   |___________|_____|       |_____________|___|
    OBJECT     |              OBJECT       |
    ___________V_____         _____________V___
   |  _____________  |       |  _____________  |
   | |      F      | |/______|_|____         | |
   | |_____________| |\      | |_____________| |
   |  NAME           |       |  LIST           |
   |  _____________  |       |  _____________  |
   | |             | |       | |             | |
   | |_________|___| |       | |___________|_| |
   |  VALUE    |     |       |  MEMBER     |   |
   |___________|_____|       |_____________|___|
    OBJECT     |              VALUE        | OPD
               |              _____________V___
 ______________V_________    |  _____________  |
| ______________________ |   | |      M      | |
|| _________  _________ ||   | |_____________| |
|||  "AB"   ||  "CD"   |||   |  NAME           |
|||_________||_________|||   |  _____________  |
||______________________||   | |             | |
|                 /      |   | |___________|_| |
|                /       |   |_____________|___|
|_______________/________|    OBJECT       |
 VALUE         /       /      _____________V___        _________________
              /       /      |  _____________  |      |  _____________  |
             /       /       | |             | |      | |      B      | |
            /      LIST      | |_____________| |      | |_____________| |
           /                 |  NAME           |      |  NAME           |
          /                  |  _____________  |      |  _____________  |
 NEW MEMBER VALUE            | |         ____|_|_____\| |             | |
                             | |_____________| |     /| |_____________| |
                             |_________________|      |_________________|
                              OBJECT                   OBJECT

                              Figure 4-19
                          After L/CLOSE/MEMBER

By executing similar groups of four primitives, varying only values of
constants, we can build up the LIST F shown in 4-20.  The calls required
are shown below:

    L/OPEN/MEMBER(L/TOBJ(OPF),ADD)
    L/ASSIGN(L/TOBJ(M.A),LC/STRING('FF'))
    L/ASSIGN(L/TOBJ(M.B),LC/STRING('GH'))
    L/CLOSE/MEMBER(L/TOBJ(OPF))

    L/OPEN/MEMBER(L/TOBJ(OPF),ADD)
    L/ASSIGN(L/TOBJ(M.A),LC/STRING('AB'))
    L/ASSIGN(L/TOBJ(M.B),LC/STRING('IJ'))
    L/CLOSE/MEMBER(L/TOBJ(OPF))

    L/OPEN/MEMBER(L/TOBJ(OPF),ADD)
    L/ASSIGN(L/TOBJ(M.A),LC/STRING('CD'))
    L/ASSIGN(L/TOBJ(M.B),LC/STRING('LM'))
    L/CLOSE/MEMBER(L/TOBJ(OPF))

The add suboperation has the effect of making the member just added, the
current member; thus no L/WHICH/MEMBER calls are needed in this
sequence.

To terminate the sequence of listops:
    L/END/LISTOP(L/TOBJ(OPF))

                      _________________
                     |  _____________  |
                     | |      F      | |
                     | |_____________| |
                     |  NAME           |
                     |  _____________  |
                     | |         ____|_|_________\
                     | |_____________| |         /
                     |  DESCRIPTION    |
                     |  _____________  |
                     | |             | |
                     | |_________|___| |
                     |  VALUE    |     |
                     |___________|_____|
                      OBJECT     |
                                 |
                  _______________V______________
                 |  __________________________  |
                 | |  _________    _________  | |
                 | | |         |  |         | | |
                 | | |  "AB"   |  |  "CD"   | | |
                 | | |_________|  |_________| | |
                 | |__________________________| |
                 |  __________________________  |
                 | |  _________    _________  | |
                 | | |         |  |         | | |
                 | | |  "EF"   |  |  "GH"   | | |
                 | | |_________|  |_________| | |
                 | |__________________________| |
                 |  __________________________  |
                 | |  _________    _________  | |
                 | | |         |  |         | | |
                 | | |  "AB"   |  |  "IJ"   | | |
                 | | |_________|  |_________| | |
                 | |__________________________| |
                 |  __________________________  |
                 | |  _________    _________  | |
                 | | |         |  |         | | |
                 | | |  "CD"   |  |  "LM"   | | |
                 | | |_________|  |_________| | |
                 | |__________________________| |
                 |______________________________|
                  VALUE

                              Figure 4-20
                           After L/END/LISTOP

A slightly more interesting exercise is to construct calls which create
a LIST named G, having the same description as F, and then to copy into
G all members of F having A equal to 'AB'.

We must first create G, an OPD and an object to represent the current
member.
   L/CREATE("STAR",LD/LIST(G,
                           LD/STRUCT(R,
                                   LD/STRING(A,STRING,2),
                                   LD/STRING(B,STRING,2)))
    L/CREATE(L/TOBJ(TOP/LEVEL),LD/OPD(OPG))
    L/CREATE(L/TOBJ(TOP/LEVEL) ,LD/STRUCT(GM,
                                   LD/STRING(A,STRING,2),
                                   LD/STRING(B,STRING,2)))

We now need to initiate two sequences of listops, one on G and one on F.
    L/BEGIN/LISTOP(L/POBJ(F),L/TOBJ(M),
                     L/TOBJ(OPF),GET)
    L/BEGIN/LISTOP(L/POBJ(G),L/TOBJ(GM),
                     L/TOBJ(OPG),ADD)
    L/WHICH/MEMBER(L/TOBJ(OPF),FIRST)
    L/WHICH/MEMBER(L/TOBJ(OPG),LAST)

We will now sequence through the members of F; whenever the current
member has A equal to 'AB', we will add a member to G.  We then copy the
values of the current member of F into the newly added member of G.
When the current member does not meet this criterion, we do nothing with
it.

First, to write a loop that will execute until we get to the end of F:
    L/TILL(L/END/OF/LIST(L/TOBJ(OPF)),x)
Whatever we put in this call to replace "x" will execute repeatedly
until the end/of/list flag has been set in OPF.

We must replace "x" with a single function call to in order to give
L/TILL what it is looking for.  However, we will be executing "x" once
for each member of F, and will need to execute several listops each
time.  The solution is to use L/CF, the compound-function function:
    L/TILL(L/END/OF/LIST(L/TOBJ(OPF)),L/CF(y))
We can now replace "y" with a sequence of function calls.

Each time we iterate, we need to process a new member of F; initially we
are set up to get the first member.  The following sequence, then, is
needed:
    L/CF(   L/OPEN/MEMBER(L/TOBJ(OPF),GET),
            z
            L/CLOSE/MEMBER(L/TOBJ(OPF)),
            L/WHICH/MEMBER(L/TOBJ(OPF),NEXT) )

The above is a compound function which will open the current member of
F, do something to it (represented above by "z"), close it, and ask for
the next member.

We want to replace "z" by a function call which tests the contents of A
in the current member of F, and either does nothing or adds a member to
G, copying the values of the current member of F.  If "w" represents the
action of adding a member to G and copying the values, then we can
express this:
    L/IF(L/EQUAL(L/TOBJ(M.A),LC/STRING('AB')),w)

A suitable way to express "add a member and copy values" is:
    L/CF(L/OPEN/MEMBER(L/TOBJ(OPG),ADD),
            L/ASSIGN(L/TOBJ(GM.A),L/TOBJ(M.A)),
            L/ASSIGN(L/TOBJ(GM.B),L/TOBJ(M.B)),
            L/CLOSE/MEMBER(L/TOBJ(OPG))
This is similar enough to the previous example so that no explanation
should be necessary.

Putting this all together, we get:
    L/TILL(L/END/OF/LIST(L/TOBJ(OPF)),
     L/CF(  L/OPEN/MEMBER(L/TOBJ(OPF),GET),
            L/IF(L/EQUAL(L/TOBJ(A),LC/STRING('AB')),
                    L/CF(   L/OPEN/MEMBER(L/TOBJ(OPG),ADD),
                            L/ASSIGN(L/TOBJ(GM.A),L/TOBJ(M.A)),
                            L/ASSIGN(L/TOBJ(GM.B),L/TOBJ(M.B)),
                            L/CLOSE/MEMBER/L/TOBJ(OPG)) ) )
            L/CLOSE/MEMBER(L/TOBJ(OPF)),
            L/WHICH/MEMBER(L/TOBJ(OPF),NEXT) ) )

To conclude the operation, we execute:
    L/LISTOP/END(L/TOBJ(OPG))
    L/LISTOP/END(L/TOBJ(OPF))

The result is a LIST G whose first member has value ('AB','CD'), and
whose second member has value ('AB','IJ').  With a few variations on the
above example, quite a few LIST operations can be performed.

4.11    Higher level functions

While these primitive i/functions are useful, we would not ordinarily
expect users to operate in datalanguage at this low level.  We want to
make these primitives available to users so that they can handle the
exceptional case, and so that they can construct their own high-level
functions for atypical applications.  Ordinarily, they ought to operate
at least at the level of the following construction (which is legal in
the real datalanguage currently implemented):

    FOR G.R,F.R WITH A EQ 'AB'
            G.R=F.R
            END
This relatively concise expression accomplishes the same result as the
elaborate construction of i/functions given at the close of the
preceding section.  We could define i/functions very similar to the
semantic functions used in the running software, and write the above
request as:
    L/FOR(L/POBJ(G),R
            L/POBJ(F),R,L/WITH(L/EQUAL(L/TOBJ(A),
                                    LC/STRING('AB')))
The differences between the i/function call and the datalanguage request
above it are principally syntactic.

In designing functions such as L/FOR and L/WITH, the central problems
have to do with choosing the right restrictions.  One cannot have all
the generality available at the primitive level.  Some important choices
for these particular functions are: (1) handling multiple inputs and
outputs, (2) when FORs are nested, how outer FORs restrict the options
available to inner FORs, (3) generality of selection functions (may then
in turn generate FORs?), (4) options with regard to where processing
should start (are we updating, replacing or appending to the output
list(s)?).

Finally, this problem is related to the more general problem of dealing
with _sets_, which are a generalization of the idea of a collection of
members in a LIST having common properties.  FOR is only one of many
operators that can input sets.

4.12    Conclusion

The present model, though embryonic, already contains enough primitives
and data types to permit definition and generalized manipulation of
hierarchical data structures.  Common data management operations, such
as retrieval by content and selective update can be expressed.

The use of this model in developing these primitives has resulted in
precise, well-defined and internally consistent specifications for
language elements and processing functions.  Operating in the laboratory
environment provided by the model seems to be a substantial benefit.

5.      Further Work

In this section, we review what has been accomplished so far in the
design and describe what work remains to be done before this design
iteration of datalanguage is complete.

5.1     A Review

Most important, among our accomplishments, we feel that we have
delineated the problems and presented the broad outlines of a solution
to development of a language for the datacomputer system.  Key elements
of our approach are the primacy of data description in capturing all the
aspects of the data, the separation of logical and physical
characteristics of data description, the ability of users to define
different views of the same data, the ability to associate functions
with different uses of data items, an attempt to capture common aspects
of data at every possible level, and the ability of users to communicate
with the datacomputer in as high a level as their application permits.

5.2     Topics for Further Research

Although more work needs to be done in general to turn out a finished
design for datalanguage, we can single out certain issues which in
particular need further investigation.

So far, only hierarchal data structures (i.e. those that can be modeled
by physical containment) have been developed to any extent.  We also
intend to investigate and provide other types of data structures. We are
confident that our language framework does not make assumptions that
would prohibit such additions.

Our current work on access regulation centers on the use of multiple
descriptions for data.  We need to do more work on both the technical
and administrative aspects of access regulation.  Problems of encrypting
data for both transmission and storage will also be investigated.

Another issue requiring further research is the protocol requirement for
process interaction with the datacomputer.

Separation of the description into independent modules needs further
research.  In particular, we need to look into work which has already
been done on separate specifications of logical descriptions, physical
descriptions, and mappings between the two.

5.3     Datalanguage Syntax

We have not yet proposed a syntax for the datalanguage we are
developing.  Certainly the most difficult parts of the problem have been
the semantic and pragmatic issues.  We are confident that various
syntactic forms can be chosen and implemented without excessive
difficulty.  It may be best to develop different syntactic forms for the
language for different types of users or even for the various subparts
of the language itself.  As discussed in section 2, the user syntax for
the datacomputer is supposed to be at a low level.  It should be easy
for _programs_ to generate datalanguage requests in this syntax.

5.4     Further Work on the Datalanguage Model

The model provides an excellent foundation on which to build up a
language with the facilities described in section 3.  Much work is yet
to be done.

For a while, emphasis will be on sets, high-level operators, language
extension and data description.

We expect to model sets as a new datatype, whose value is ordinarily
shared with other objects.  Some further work on binding and sharing of
values is needed to support this.

Sets can be regarded as a special case of generalized relations, which
will come somewhat later.

High-level operators such as FOR will be constructed from the existing
primitives, and will eventually be defined to have one effect but
several possible expansions.  The expansion will depend on the
representation of the data and the presence of auxiliary structures.

Alternate expansions will be possible when the data description has been
broken up into its various modules.  This, also, requires some further
research.

We feel that the language extension problem is much more easily attacked
in the environment provided by the model datacomputer.  In particular,
we expect the laboratory environment to be helpful in evaluating the
complex interactions and pervasive effects of operators in the language
which extend the language.

Data description work in the near term will focus on the isolation of
attributes, the representation of variable structure in description, the
description of descriptions and the development of a sufficient set of
builtin data types.

Later, we expect to model the semantics of pointers as a datatype, when
the representation of the pointer and the semantics of the address space
into which it points are specified in the description of the pointer.

A large number of lower-level issues will be attacked, including some of
the problems discovered in the modeling to date.  Some of these are
pointed out in the discussions in section 4.

5.5     Applications Support

The datalanguage we are designing is intended to provide services to
sub-systems solving a broad class of problems related to data
management.  Examples of such sub-systems are: report generators, online
query systems for non-programmers, document-handling systems,
transaction processing systems, real-time data collection systems, and
library and bibliographic systems.  There are many more.

The idea is that such systems will run on other machines, reference or
store data at the datacomputer, and make heavy use of datalanguage.
Such a system would not be written entirely in datalanguage, but a large
component of its function would be expressed in datalanguage requests;
some controlling module would build the requests and perform the non-
datalanguage functions.

While we have experience with such applications in other environments,
and we talk to potential users, it will require some work to determine
that our language is actually adequate for them.  That is, we are not
attacking directly the problem of building a human-oriented online query
system; we are trying to provide the tools which will make it easy to
build one. There is a definite need to analyze whether the tools are
likely to be good enough. Of course, the ultimate test will be in actual
use, but we want to filter out as many problems as we can before
implementation.

An important component of supporting applications is that the using
programs will frequently be written in high-level languages such as
FORTRAN, COBOL or PL/1.  We will want to investigate the ability of
datalanguage to support such users, while the design is taking shape.

5.6     Future Plans

This paper has laid the foundations for a new design of datalanguage.
Section 3 provides an outline for a datalanguage design, which will be
filled in during the coming months.  Following the issue of a detailed
specification, we anticipate extensive review, revisions, and

incorporation into the implementation plans.  Implementation will occur
in stages, compatible with the established plans for development of
datacomputer service and data management capabilities.

       [ This RFC was put into machine readable form for entry ]
       [ into the online RFC archives by Alex McKenzie with    ]
       [ support from GTE, formerly BBN Corp.           1/2000 ]

 

User Contributions:

Comment about this RFC, ask questions, or add new information about this topic: