faqs.org - Internet FAQ Archives

RFC 8248 - Security Automation and Continuous Monitoring (SACM)


Or Display the document by number




Internet Engineering Task Force (IETF)                     N. Cam-Winget
Request for Comments: 8248                                 Cisco Systems
Category: Informational                                      L. Lorenzin
ISSN: 2070-1721                                             Pulse Secure
                                                          September 2017

   Security Automation and Continuous Monitoring (SACM) Requirements

Abstract

   This document defines the scope and set of requirements for the
   Security Automation and Continuous Monitoring (SACM) architecture,
   data model, and transfer protocols.  The requirements and scope are
   based on the agreed-upon use cases described in RFC 7632.

Status of This Memo

   This document is not an Internet Standards Track specification; it is
   published for informational purposes.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Not all documents
   approved by the IESG are a candidate for any level of Internet
   Standard; see Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   https://www.rfc-editor.org/info/rfc8248.

Copyright Notice

   Copyright (c) 2017 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
     1.1.  Requirements Language . . . . . . . . . . . . . . . . . .   3
   2.  Requirements  . . . . . . . . . . . . . . . . . . . . . . . .   3
     2.1.  Requirements for SACM . . . . . . . . . . . . . . . . . .   4
     2.2.  Requirements for the Architecture . . . . . . . . . . . .   7
     2.3.  Requirements for the Information Model  . . . . . . . . .   9
     2.4.  Requirements for the Data Model . . . . . . . . . . . . .  10
     2.5.  Requirements for Data Model Operations  . . . . . . . . .  12
     2.6.  Requirements for SACM Transfer Protocols  . . . . . . . .  14
   3.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  15
   4.  Security Considerations . . . . . . . . . . . . . . . . . . .  15
     4.1.  Trust between Provider and Requestor  . . . . . . . . . .  16
     4.2.  Privacy Considerations  . . . . . . . . . . . . . . . . .  17
   5.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  18
     5.1.  Normative References  . . . . . . . . . . . . . . . . . .  18
     5.2.  Informative References  . . . . . . . . . . . . . . . . .  18
   Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . .  18
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  19

1.  Introduction

   Today's environment of rapidly evolving security threats highlights
   the need to automate the sharing of security information (such as
   posture information) while protecting user information and the
   systems that store, process, and transmit this information.  Security
   threats can be detected in a number of ways.  The Security Automation
   and Continuous Monitoring (SACM) charter focuses on how to collect
   and share this information based on use cases that involve posture
   assessment of endpoints.

   Scalable and sustainable collection, expression, and evaluation of
   endpoint information is foundational to SACM's objectives.  To secure
   and defend a network, one must reliably determine what devices are on
   the network, how those devices are configured from a hardware
   perspective, what software products are installed on those devices,
   and how those products are configured.  We need to be able to
   determine, share, and use this information in a secure, timely,
   consistent, and automated manner to perform endpoint posture
   assessments.

   This document focuses on describing the requirements for facilitating
   the exchange of posture assessment information in the enterprise, in
   particular, for the use cases as exemplified in [RFC7632].

   As proposals are evaluated for SACM standardization, the documents
   describing each proposal are expected to include a section that
   describes how the enumerated requirements are addressed.

   This document uses terminology defined in [TERMS].

1.1.  Requirements Language

   Use of each capitalized word within a sentence or phrase carries the
   following meaning during the SACM WG's protocol selection process:

    MUST - indicates an absolute requirement

    MUST NOT - indicates something absolutely prohibited

    SHOULD - indicates a strong recommendation of a desired result

    SHOULD NOT - indicates a strong recommendation against a result

    MAY - indicates a willingness to allow an optional outcome

   When the words appear in lower case, their natural language meaning
   is used.

2.  Requirements

   This document defines requirements based on the SACM use cases
   described in [RFC7632].  This section describes the requirements used
   by SACM to assess and compare candidate data models, interfaces, and
   protocols.  These requirements express characteristics or features
   that a candidate protocol, information model, or data model must be
   capable of offering to ensure security and interoperability.

   Multiple data models, protocols, and transfers may be employed in a
   SACM environment.  A SACM transfer protocol is one that runs on top
   of transport-layer protocols such as TCP/IP or internet-layer
   protocols such as HTTP, carries operations (requests/responses), and
   moves data.

   SACM will define an architecture and information model focused on
   addressing the needs for determining, sharing, and using posture
   information securely via posture information providers and posture
   information consumers.  With the information model defining assets
   and attributes to facilitate the guidance, collection, and assessment
   of posture, tasks that should be considered include:

   1.  Asset Classification: Map the target endpoint and/or the assets
       on the target endpoints to asset classes.  This enables

       identification of the attributes needed to exchange information
       pertaining to the target endpoint.

   2.  Attribute Definition: Define the attributes desired to be
       collected from each target endpoint.  For instance, organizations
       will want to know what software is installed and its critical
       security attributes such as patch level.

   3.  Policy Definition: This is where an organization can express its
       policy for acceptable or problematic values of an endpoint
       attribute.  The expected values of an endpoint attribute are
       determined for later comparison against the actual endpoint
       attribute values during the evaluation process.  Expected values
       may include both values that are good as well as values that
       represent problems, such as vulnerabilities.  The organization
       can also specify the endpoint attributes that are to be present
       for a given target endpoint.

   4.  Information Collection: Collect information (attribute values)
       from the target endpoint to populate the endpoint data.

   5.  Endpoint Assessment: Evaluate the actual values of the endpoint
       attributes against those expressed in the policy.  (An evaluation
       result may become additional endpoint data.)

   6.  Result Reporting: Report the results of the evaluation for use by
       other components.  Examples of the use of a report would be
       additional evaluation, network enforcement, vulnerability
       detection, and license management.

2.1.  Requirements for SACM

   Many deployment scenarios can be instantiated to address the above
   tasks and the use cases defined in [RFC7632].  To ensure
   interoperability, scalability, and flexibility in any of these
   deployments, the following requirements are defined for proposed SACM
   standards:

   G-001 (Solution Extensibility):  The information model, data models,
    protocols, and transfers defined by SACM MUST be designed to allow
    support for future extensions.  SACM MUST allow for both
    standardized and proprietary extensions.

    1.  The information model and programmatic interfaces (see G-012 for
        one example) MUST support the ability to add new operations
        while maintaining backwards compatibility.  SACM-defined
        transfer protocols MUST have extensibility to allow them to
        transfer operations that are defined in the future.

    2.  The query language MUST allow for general inquiries as well as
        expression of specific attributes or relationships between
        attributes; the retrieval of specific information based on an
        event or on a continuous basis; and the ability to retrieve
        specific pieces of information, specific types or classes of
        information, or the entirety of available information.

    3.  The information model MUST accommodate the interoperable
        addition of new data types and/or schemas.

   G-002 (Interoperability):  The data models, protocols, and transports
    MUST be specified with enough details to ensure interoperability.

   G-003 (Scalability):  SACM needs to support a broad set of deployment
    scenarios.  The data models, protocols, and transports have to be
    scalable unless they are specifically defined to apply to a special-
    purpose scenario, such as constrained devices.  A SACM transfer
    protocol standard SHOULD include a section on scalability
    considerations that addresses the number of endpoints and amount of
    information to which it can reasonably be expected to scale.
    Scalability must be addressed to support:

    *  Large messages: It is possible that the size of posture
       assessment information can vary from a single assessment that is
       small in size to a very large message or a very large set of
       assessments (up to multiple gigabytes in size).

    *  Large number of messages per second: A deployment may involve
       many rapid or simultaneous events that require processing,
       generating many messages per second.

    *  Large number of providers and consumers: A deployment may consist
       of a very large number of endpoints requesting and/or producing
       posture assessment information.

    *  Large number of target endpoints: A deployment may be managing
       information of a very large number of target endpoints.

   G-004 (Versatility):  The data model, protocols, and transports must
    be suitably specified to enable implementations to fit into
    different deployment models and scenarios, including considerations
    for implementations of data models and transports operating in
    constrained environments.  Separate solutions may be necessary to
    meet the needs of specific deployment models and scenarios.

   G-005 (Information Extensibility):  Non-standard (implementation-
    specific) attributes MUST be supported.  A method SHOULD be defined
    for preventing collisions from occurring in the naming of all

    attributes independent of their source.  For interoperability and
    scope boundary, the information model MUST define the mandatory set
    of attributes.

   G-006 (Data Protection):  To protect the information being shared,
    SACM components MUST protect the integrity and confidentiality of
    data in transit (end to end) and data at rest (as information is
    stored in repositories).  Mechanisms for this protection are
    unspecified but should include industry best practices.  These
    mechanisms are required to be available (i.e., all data-handling
    components must support them) but are not required to be used in all
    cases.

   G-007 (Data Partitioning):  A method for partitioning data MUST be
    supported to accommodate considerations such as geographic,
    regulatory, operational requirements, overlay boundaries, and
    federation (where the data may be collected in multiple locations
    and either centralized or kept in the local region).  Where
    replication of data is supported, it is required that methods exist
    to prevent update loops.

   G-008 (Versioning and Backward Compatibility):  Announcement and
    negotiation of versions, inclusive of existing capabilities (such as
    transfer protocols, data models, specific attributes within data
    models, standard attribute expression sets, etc.) MUST be supported.
    Negotiation for both versioning and capabilities is needed to
    accommodate future growth and ecosystems with mixed capabilities.

   G-009 (Information Discovery):  There MUST be mechanisms for
    components to discover what information is available across the
    ecosystem (i.e., a method for cataloging data available in the
    ecosystem and advertising it to consumers), where to go to get a
    specific piece of that information (i.e., which provider has the
    information), and what schemas are in use for organizing the
    information.  For example, a method can be provided by which a node
    can locate the advertised information so that consumers are not
    required to have a priori knowledge to find available information.

   G-010 (Target Endpoint Discovery):  SACM MUST define the means by
    which target endpoints may be discovered.  The use case in
    Section 2.1.2 of [RFC7632] describes the need to discover endpoints
    and their composition.

   G-011 (Push and Pull Access):  Three methods of data access MUST be
    supported: a Pull model, a solicited Push model, and an unsolicited
    Push model.  All of the methods of data access MUST support the
    ability for the initiator to filter the set of posture assessment
    information to be delivered.  Additionally, the provider of the

    information MUST be able to filter the set of posture assessment
    information based on the permissions of the recipient.  This
    requirement is driven by the use cases in Sections 2.1.3 and 2.1.4
    of [RFC7632].

   G-012 (SACM Component Interface):  The interfaces by which SACM
    components communicate to share endpoint posture information MUST be
    well defined.  That is, the interface defines the data model, SACM
    transfer protocols, and network transfer protocols to enable SACM
    components to communicate.

   G-013 (Endpoint Location and Network Topology):  The SACM
    architecture and interfaces MUST allow for the target endpoint
    (network) location and network topology to be modeled and
    understood.  Where appropriate, the data model and the interfaces
    SHOULD allow for discovery of the target endpoint location, network
    topology, or both.

   G-014 (Target Endpoint Identity):  The SACM architecture and
    interfaces MUST support the ability of components to provide
    attributes that can be used to compose an identity for a target
    endpoint.  These identities MAY be composed of attributes from one
    or more SACM components.

   G-015 (Data Access Control):  Methods of access control must be
    supported to accommodate considerations such as geographic,
    regulatory, operational, and federations.  Entities accessing or
    publishing data MUST identify themselves and pass access policy.

2.2.  Requirements for the Architecture

   Following are the requirements for the SACM architecture:

   ARCH-001 (Component Functions):  At the simplest abstraction, the
    SACM architecture MUST represent the core components and interfaces
    needed to perform the production and consumption of posture
    assessment information.

   ARCH-002 (Scalability):  The architectural components MUST account
    for a range of deployments, from very small sets of endpoints to
    very large deployments.

   ARCH-003 (Flexibility):  The architectural components MUST account
    for different deployment scenarios where the architectural
    components may be implemented, deployed, or used within a single
    application, service, or network, or may comprise a federated
    system.

   ARCH-004 (Separation of Data and Management Functions):  SACM MUST
    define both the configuration and management of the SACM data models
    and protocols used to transfer and share posture assessment
    information.

   ARCH-005 (Topology Flexibility):  Both centralized and decentralized
    (peer-to-peer) information exchange MUST be supported.  Centralized
    data exchange enables use of a common data format to bridge together
    data exchange between diverse systems and can leverage a virtual
    data store that centralizes and offloads all data access, storage,
    and maintenance to a dedicated resource.  Decentralized data
    exchange enables simplicity of sharing data between relatively
    uniform systems and between small numbers of systems, especially
    within a single enterprise domain.  The fact that a centralized or
    decentralized deployment is used SHOULD be invisible to a consumer.
    However, there may be cases where the producer chooses to include
    that information due to consumer preference.

   ARCH-006 (Capability Negotiation):  Announcement and negotiation of
    functional capabilities (such as authentication protocols,
    authorization schemes, data models, transfer protocols, etc.)  MUST
    be supported, enabling a SACM component to make inquiries about the
    capabilities of other components in the SACM ecosystem.

   ARCH-007 (Role-Based Authorization):  The SACM architecture MUST be
    capable of effecting role-based authorization.  Distinction of
    endpoints capable of and authorized to provide or consume
    information is required to address appropriate access controls.

   ARCH-008 (Context-Based Authorization):  The SACM architecture MUST
    be capable of effecting context-based authorization.  Different
    policies (e.g., business, regulatory, etc.) might specify what data
    may be exposed to, or shared by, consumers based on one or more
    attributes of the consumer.  The policy might specify that consumers
    are required to share specific information either back to the system
    or to administrators.

   ARCH-009 (Time Synchronization):  Actions or decisions based on time-
    sensitive data (such as user logon/logoff, endpoint connection/
    disconnection, endpoint behavior events, etc.) are all predicated on
    a synchronized understanding of time.  The SACM architecture MUST
    provide a mechanism for all components to synchronize time.  A
    mechanism for detecting and reporting time discrepancies SHOULD be
    provided by the architecture and reflected in the information model.

2.3.  Requirements for the Information Model

   The SACM information model represents the abstracted representation
   for posture assessment information to be communicated.  SACM data
   models must adhere to and comply with the SACM information model.
   The requirements for the SACM information model include:

   IM-001 (Extensible Attribute Vocabulary):  The information model MUST
    define a minimum set of attributes for communicating posture
    information, to ensure interoperability between data models.
    (Individual data models may define attributes beyond the mandatory-
    to-implement minimum set.)  The attributes should be defined with a
    clear mechanism for extensibility to enable data models to adhere to
    SACM's required attributes as well as allow for their own
    extensions.  The attribute vocabulary should be defined with a clear
    mechanism for extensibility to enable future versions of the
    information model to be interoperably expanded with new attributes.

   IM-002 (Posture Data Publication):  The information model MUST allow
    for the data to be provided by a SACM component either solicited or
    unsolicited.  No aspect of the information model should be dependent
    upon or assume a Push or Pull model of publication.

   IM-003 (Data Model Negotiation):  SACM's information model MUST allow
    support for different data models, data model versions, and
    different versions of the operations on the data models and transfer
    protocols.  The SACM information model MUST include the ability to
    discover and negotiate the use of a particular data model or any
    data model.

   IM-004 (Data Model Identification):  The information model MUST
    provide a means to uniquely identify each data model.  The
    identifier MUST contain both an identifier of the data model and a
    version indicator for the data model.  The identifiers SHOULD be
    decomposable so that a customer can query for any version of a
    specific data model and compare returned values for older or newer
    than a desired version.

   IM-005 (Data Lifetime Management):  The information model MUST
    provide a means to allow data models to include data lifetime
    management.  The information model must identify attributes that can
    allow data models to, at minimum, identify the data's origination
    time and expected time of next update or data longevity (how long
    the data should be assumed to still be valid).

   IM-006 (Singularity and Modularity):  The SACM information model MUST
    be singular (i.e., there is only one information model, not multiple
    alternative information models from which to choose) and MAY be

    modular (a conjunction of several subcomponents) for ease of
    maintenance and extension.  For example, endpoint identification
    could be an independent subcomponent of the information model, to
    simplify updating of endpoint identification attributes.

2.4.  Requirements for the Data Model

   The SACM information model represents an abstraction for "what"
   information can be communicated and "how" it is to be represented and
   shared.  It is expected that as applications may produce posture
   assessment information, they may share it using a specific data
   model.  Similarly, applications consuming or requesting posture
   assessment information may require that it be based on a specific
   data model.  Thus, while there may exist different data models and
   schemas, they should adhere to the SACM information model and meet
   the requirements defined in this section.

   The specific requirements for candidate data models include:

   DM-001 (Element Association):  A SACM information model consists of a
    set of SACM information model elements.  A SACM data model MUST be
    derived from the SACM information model.  A SACM data model consists
    of a set of SACM data model elements.  In this derivation, a SACM
    data model element MAY map to one or more SACM information model
    elements.  In addition, a SACM data model MAY include additional
    data model elements that are not associated with any SACM
    information model elements.

   DM-002 (Data Model Structure):  The data model can be structured
    either as one single module or separated into modules and submodules
    that allow for references between them.  The data model structure
    MAY reflect structure in the information model but does not need to.
    For example, the data model might use one module to define
    endpoints, and that module might reference other modules that
    describe the various assets associated with the endpoint.
    Constraints and interfaces might further be defined to resolve or
    tolerate ambiguity in the references (e.g., the same IP address used
    in two separate networks).

   DM-003 (Search Flexibility):  The search interfaces and actions MUST
    include the ability to start a search anywhere within a data model
    structure and the ability to search based on patterns ("wildcard
    searches") as well as specific data elements.

   DM-004 (Full vs. Partial Updates):  The data model SHOULD include the
    ability to allow providers of data to provide the data as a whole or
    when updates occur.  For example, a consumer can request a full
    update on initial engagement, then request to receive deltas

    (updates containing only the changes since the last update) on an
    ongoing basis as new data is generated.

   DM-005 (Loose Coupling):  The data model SHOULD allow for a loose
    coupling between the provider and the consumer, such that the
    consumer can request information without being required to request
    it from a specific provider, and a provider can publish information
    without having a specific consumer targeted to receive it.

   DM-006 (Data Cardinality):  The data model MUST describe their
    constraints (e.g., cardinality).  As posture information and the
    tasks for collection, aggregation, or evaluation could comprise one
    or more attributes, interfaces and actions MUST allow and account
    for such cardinality and for conditional, optional, or mandatory
    attributes.

   DM-007 (Data Model Negotiation):  The interfaces and actions in the
    data model MUST include capability negotiation to enable discovery
    of supported and available data types and schemas.

   DM-008 (Data Origin):  The data model MUST include the ability for
    consumers to identify the data origin (provider that collected the
    data).

   DM-009 (Origination Time):  The data model SHOULD allow the provider
    to include the information's origination time.

   DM-010 (Data Generation):  The data model MUST allow the provider to
    include attributes defining how the data was generated (e.g., self-
    reported, reported by aggregator, scan result, etc.).

   DM-011 (Data Source):  The data model MUST allow the provider to
    include attributes identifying the data source (target endpoint from
    which the data was collected), e.g., hostname, domain (DNS) name, or
    application name.

   DM-012 (Data Updates):  The data model SHOULD allow the provider to
    include attributes defining whether the information provided is a
    delta, partial, or full set of information.

   DM-013 (Multiple Collectors):  The data model MUST support the
    collection of attributes by a variety of collectors, including
    internal collectors, external collectors with an authenticated
    relationship with the endpoint, and external collectors based on
    network and other observers.

   DM-014 (Attribute Extensibility):  All of the use cases in Section 2
    of [RFC7632] describe the need for an attribute dictionary.  With

    SACM's scope focused on posture assessment, the data model attribute
    collection and aggregation MUST have a well-understood set of
    attributes inclusive of their meaning or usage intent.  The data
    model MUST include all attributes defined in the information model
    and MAY include additional attributes beyond those found in the
    information model.  Additional attributes MUST be defined in
    accordance with the extensibility framework provided in the
    information model (see IM-001).

   DM-015 (Solicited vs. Unsolicited Updates):  The data model MUST
    enable a provider to publish data either solicited (in response to a
    request from a consumer) or unsolicited (as new data is generated,
    without a request required).  For example, an external collector can
    publish data in response to a request by a consumer for information
    about an endpoint, or it can publish data as it observes new
    information about an endpoint, without any specific consumer request
    triggering the publication; a compliance-server provider may publish
    endpoint posture information in response to a request from a
    consumer (solicited), or it may publish posture information driven
    by a change in the posture of the endpoint (unsolicited).

   DM-016 (Transfer Agnostic):  The data model MUST be transfer
    agnostic, to allow for the data operations to leverage the most
    appropriate SACM transfer protocol.

2.5.  Requirements for Data Model Operations

   Posture information data adhering to a data model must also provide
   interfaces that include operations for access and production of the
   data.  Operations requirements are distinct from transfer
   requirements in that operations requirements are requirements on the
   application performing requests and responses, whereas transfer
   requirements are requirements on the transfer protocol carrying the
   requests and responses.  The specific requirements for such
   operations include:

   OP-001 (Time Synchronization):  Request and response operations MUST
    be timestamped, and published information SHOULD capture time of
    publication.  Actions or decisions based on time-sensitive data
    (such as user logon/logoff, endpoint connection/disconnection,
    endpoint behavior events, etc.) are all predicated on a synchronized
    understanding of time.  A method for detecting and reporting time
    discrepancies SHOULD be provided.

   OP-002 (Collection Abstraction):  Collection is the act of a SACM
    component gathering data from a target endpoint.  The request for a
    data item MUST include enough information to properly identify the
    item to collect, but the request shall not be a command to directly

    execute nor be directly applied as arguments to a command.  The
    purpose of this requirement is primarily to reduce the potential
    attack vectors but has the additional benefit of abstracting the
    request for collection from the collection method, thereby allowing
    more flexibility in how collection is implemented.

   OP-003 (Collection Composition):  A collection request MAY be
    composed of multiple collection requests (which yield collected
    values).  The desire for multiple values MUST be expressed as part
    of the collection request, so that the aggregation can be resolved
    at the point of collection without having to interact with the
    requestor.  This requirement should not be interpreted as preventing
    a collector from providing attributes that were not part of the
    original request.

   OP-004 (Attribute-Based Query):  A query operation is the act of
    requesting data from a provider.  Query operations SHOULD be based
    on a set of attributes.  Query operations MUST support both a query
    for specific attributes and a query for all attributes.  The use
    case in Section 2.1.2 of [RFC7632] describes the need for the data
    model to support a query operation based on a set of attributes to
    facilitate collection of information such as posture assessment,
    inventory (of endpoints or endpoint components), and configuration
    checklist.

   OP-005 (Information-Based Query with Filtering):  The query operation
    MUST support filtering.  The use case in Section 2.1.3 of [RFC7632]
    describes the need for the data model to support the means for the
    information to be collected through a query mechanism.  Furthermore,
    the query operation requires filtering capabilities to allow for
    only a subset of information to be retrieved.  The query operation
    MAY be a synchronous request or asynchronous request.

   OP-006 (Operation Scalability):  The operation resulting from a query
    operation MUST be able to handle the return and receipt of large
    amounts of data.  The use case in Section 2.1.4 of [RFC7632]
    describe the need for the data model to support scalability.  For
    example, the query operation may result in a very large set of
    attributes as well as a large set of targets.

   OP-007 (Data Abstraction):  The data model MUST allow a SACM
    component to communicate what data was used to construct the target
    endpoint's identity, so that other SACM components can determine
    whether they are constructing an equivalent target endpoint (and its
    identity) and whether they have confidence in that identity.  SACM
    components SHOULD have interfaces defined to transmit this data
    directly or to refer to where the information can be retrieved.

   OP-008 (Provider Restriction):  Request operations MUST include the
    ability to restrict the data to be provided by a specific provider
    or a provider with specific characteristics.  Response operations
    MUST include the ability to identify the provider that supplied the
    response.  For example, a SACM consumer should be able to request
    that all of the data come from a specific provider by identity
    (e.g., Provider A) or from a provider that is in a specific location
    (e.g., in the Boston office).

2.6.  Requirements for SACM Transfer Protocols

   The term "SACM transfer protocol" is intended to be distinguished
   from underlying transport- and internet-layer protocols such as TCP/
   IP or operating at an application-layer protocol such as HTTP.  The
   SACM transfer protocol is focused on moving data and performing
   necessary access control operations; it is agnostic to the data model
   operations.

   The requirements for SACM transfer protocols include:

   T-001 (Multiple Transfer Protocol Support):  SACM transfer protocols
    will vary depending on the deployment model that relies on different
    transfer-layer requirements, different device capabilities, and
    system configurations dealing with connectivity.  For example, where
    posture attributes may be collected directly from an endpoint using
    the Network Endpoint Assessment (NEA) model [RFC5209], different
    transports may be defined to collect them using Posture Transport
    Protocol for Extensible Authentication Protocol Tunnel Methods (PT-
    EAP) [RFC7171] or Posture Transport Protocol over TLS (PT-TLS)
    [RFC6876], depending on the deployment scenario.

   T-002 (Data Integrity):  SACM transfer protocols MUST be able to
    ensure data integrity for data in transit.

   T-003 (Data Confidentiality):  SACM transfer protocols MUST be able
    to support data confidentiality.  SACM transfer protocols MUST
    ensure data protection for data in transit (e.g., by encryption) to
    provide confidentiality, integrity, and robustness against protocol-
    based attacks.  Note that while the transfer MUST be able to support
    data confidentiality, implementations MAY provide a configuration
    option that enables and disables confidentiality in deployments.
    Protection for data at rest is not in scope for transfer protocols.
    Data protection MAY be used for both privacy and non-privacy
    scenarios.

   T-004 (Transfer Protection):  SACM transfer protocols MUST be capable
    of supporting mutual authentication and replay protection.

   T-005 (Transfer Reliability):  SACM transfer protocols MUST provide
    reliable delivery of data.  This includes the ability to perform
    fragmentation and reassembly and to detect replays.  The SACM
    transfer may take advantage of reliability features in the network
    transport; however, the network transport may be unreliable (e.g.,
    UDP), in which case the SACM transfer running over the unreliable
    network transport is responsible for ensuring reliability (i.e., by
    provisions such as confirmations and retransmits).

   T-006 (Transfer-Layer Requirements):  Each SACM transfer protocol
    MUST clearly specify the transport-layer requirements it needs to
    operate correctly.  Examples of items that may need to be specified
    include connectivity requirements, replay requirements, data link
    encryption requirements, and/or channel-binding requirements.  These
    requirements are needed in order for deployments to be done
    correctly.

   T-007 (Transfer Protocol Adoption):  SACM SHOULD, where reasonably
    possible, leverage and use existing IETF transfer protocols versus
    defining new ones.

3.  IANA Considerations

   This document does not require any IANA actions.

4.  Security Considerations

   This document defines the requirements for SACM.  As such, it is
   expected that several data models, protocols, and transfer protocols
   may be defined or reused from already-existing standards.

   To address security and privacy considerations, the data model,
   protocols, and transports must consider authorization based on
   consumer function and privileges, to only allow authorized consumers
   and providers to access specific information being requested or
   published.

   To enable federation across multiple entities (such as across
   organizational or geographic boundaries), authorization must also
   extend to infrastructure elements themselves, such as central
   controllers, brokers, and data repositories.

   In addition, authorization needs to extend to specific information or
   resources available in the environment.  In other words,
   authorization is based on the subject (the information requestor),
   the provider (the information responder), the object (the endpoint
   the information is being requested on), and the attribute (what piece

   of data is being requested).  The method by which this authorization
   is applied is unspecified.

   SACM's charter focuses on the workflow orchestration and the sharing
   of posture information for improving the efficacy of security
   applications such as compliance, configuration, assurance, and other
   threat and vulnerability reporting and remediation systems.  While
   the goal is to facilitate the flow of information securely, it is
   important to note that participating endpoints may not be cooperative
   or trustworthy.

4.1.  Trust between Provider and Requestor

   The information given from the provider to a requestor may come with
   different levels of trustworthiness given the different potential
   deployment scenarios and compromise at the provider, the requesting
   consumer, or devices that are involved in the transfer between the
   provider and requestor.  This section will describe the different
   considerations that may reduce the level of trustworthiness of the
   information provided.

   In the information transfer flow, it is possible that some of the
   devices may serve as proxies or brokers and, as such, may be able to
   observe the communications flowing between an information provider
   and requestor.  Without appropriate protections, it is possible for
   these proxies and brokers to inject and affect man-in-the-middle
   attacks.

   In general, it is common to distrust the network service provider,
   unless the full hop-by-hop communications process flow is well
   understood.  As such, the posture information provider should protect
   the posture information data it provides as well as the transfer it
   uses.  Similarly, while there may be providers whose goal is to
   openly share its information, there may also be providers whose
   policy is to grant access to certain posture information based on its
   business or regulatory policy.  In those situations, a provider may
   require full authentication and authorization of the requestor (or
   set of requestors) and share only the authorized information to the
   authenticated and authorized requestors.

   Beyond distrusting the network service provider, a requestor must
   also take into account that the information received from the
   provider may have been communicated through an undetermined network
   communications system.  That is, the posture information may have
   traversed through many devices before reaching the requestor.  SACM
   specifications should provide the means for verifying data origin and
   data integrity and, at minimum, provide endpoint authentication and
   transfer integrity.

   A requestor may require data freshness indications, both knowledge of
   data origination as well as time of publication, so that it can make
   more informed decisions about the relevance of the data based on its
   currency and/or age.

   It is also important to note that endpoint assessment reports,
   especially as they may be provided by the target endpoint, may pose
   untrustworthy information.  The considerations for this are described
   in Section 8 of [RFC5209].

   The trustworthiness of the posture information given by the provider
   to one or many requestors is dependent on several considerations.
   Some of these include the requestor requiring:

   o  Full disclosure of the network topology path to the provider(s).

   o  Direct (peer-to-peer) communication with the provider.

   o  Authentication and authorization of the provider.

   o  Either or both confidentiality and integrity at the transfer
      layer.

   o  Either or both confidentiality and integrity at the data layer.

4.2.  Privacy Considerations

   SACM information may contain sensitive information about the target
   endpoint as well as revealing identity information of the producer or
   consumer of such information.  Similarly, as part of the SACM
   discovery mechanism, the capabilities and roles (e.g., SACM
   components enabled) advertised by the endpoint may be construed as
   private information.

   In addition to identity and SACM capabilities information disclosure,
   the use of timestamps (or other attributes that can be used as
   identifiers) could be further used to determine a target endpoint or
   user's behavioral patterns.  Such attributes may also be deemed
   sensitive and may require further protection or obfuscation to meet
   privacy concerns.  That is, there may be applications as well as
   business and regulatory practices that require that aspects of such
   information be hidden from any parties that do not need to know it.

   Data confidentiality can provide some level of privacy but may fall
   short where unnecessary data is still transmitted.  In those cases,
   filtering requirements at the data model such as OP-005 must be
   applied to ensure that such data is not disclosed.  [RFC6973]

   provides guidelines that SACM protocols, information models, and data
   models should follow.

5.  References

5.1.  Normative References

   [RFC7632]  Waltermire, D. and D. Harrington, "Endpoint Security
              Posture Assessment: Enterprise Use Cases", RFC 7632,
              DOI 10.17487/RFC7632, September 2015,
              <https://www.rfc-editor.org/info/rfc7632>.

5.2.  Informative References

   [RFC5209]  Sangster, P., Khosravi, H., Mani, M., Narayan, K., and J.
              Tardo, "Network Endpoint Assessment (NEA): Overview and
              Requirements", RFC 5209, DOI 10.17487/RFC5209, June 2008,
              <https://www.rfc-editor.org/info/rfc5209>.

   [RFC6876]  Sangster, P., Cam-Winget, N., and J. Salowey, "A Posture
              Transport Protocol over TLS (PT-TLS)", RFC 6876,
              DOI 10.17487/RFC6876, February 2013,
              <https://www.rfc-editor.org/info/rfc6876>.

   [RFC6973]  Cooper, A., Tschofenig, H., Aboba, B., Peterson, J.,
              Morris, J., Hansen, M., and R. Smith, "Privacy
              Considerations for Internet Protocols", RFC 6973,
              DOI 10.17487/RFC6973, July 2013,
              <https://www.rfc-editor.org/info/rfc6973>.

   [RFC7171]  Cam-Winget, N. and P. Sangster, "PT-EAP: Posture Transport
              (PT) Protocol for Extensible Authentication Protocol (EAP)
              Tunnel Methods", RFC 7171, DOI 10.17487/RFC7171, May 2014,
              <https://www.rfc-editor.org/info/rfc7171>.

   [TERMS]    Birkholz, H., Lu, J., Strassner, J., and N. Cam-Winget,
              "Security Automation and Continuous Monitoring (SACM)
              Terminology", Work in Progress, draft-ietf-sacm-
              terminology-13, July 2017.

Acknowledgments

   The authors would like to thank Barbara Fraser, Jim Bieda, and Adam
   Montville for reviewing and contributing to this document.  In
   addition, we recognize valuable comments and suggestions made by Jim
   Schaad and Chris Inacio.

Authors' Addresses

   Nancy Cam-Winget
   Cisco Systems
   3550 Cisco Way
   San Jose, CA  95134
   United States of America

   Email: ncamwing@cisco.com

   Lisa Lorenzin
   Pulse Secure
   2700 Zanker Rd., Suite 200
   San Jose, CA  95134
   United States of America

   Email: llorenzin-ietf@1000plus.com

 

User Contributions:

Comment about this RFC, ask questions, or add new information about this topic: